

| da | 125.412 | mm | |
| Da | 250 | mm | |
| Ca | 77.8 | mm | |
| A1 | 149.225 | mm | |
| A2 | 260.35 | mm | |
| S | 4.763 | mm | |
| ba | 61.119 | mm | |
| H | 298.45 | mm | |
| H1 | 152.4 | mm | |
| H2 | 60.325 | mm | |
| L | 511.175 | mm | |
| Threaded holes | |||
| R1 | 87.313 | mm | |
| R2 | 38.1 | mm | |
| RG | 3/4 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 51.594 | mm | |
| Housing |
SSAFS 528
|
|||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring |
SR-28-0
|
|||
| Taconite seal | TER 122 | |||
|
||||
| End plug (suffix Y) |
EPR 27
|
|||
| Max. speed for Taconite seal | 625 | r/min |

| P60° | 249 | kN | |
| P90° | 149 | kN | |
| P120° | 94.3 | kN | |
| P150° | 85.9 | kN | |
| P180° | 103 | kN | |
| Pa | 28.5 | kN |
| Mass pillow block | 94.3 | kg |
| Cap bolt |
4 x 1-8 UNC
|
|||
| Cap bolt recommended tightening torque | 799.9 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Eye bolt |
2 x 3/8-16 UNC
|
|||
| Initial grease fill | 481.95 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 16101-2Z | 12 | 30 | 8 | Bearings, units and housings |
|---|---|---|---|---|
| 170 VA R | 153 | - | - | Seals |
| 23160 CCK/W33 | 300 | 500 | 160 | Bearings, units and housings |
| 35020 | 88.9 | 120.68 | 11.13 | Seals |
| 3751 | 9.525 | 25.37 | 6.35 | Seals |
| 39975 | 101.6 | 130.2 | 11.13 | Seals |
| 40x90x8 CRW1 R | 40 | 90 | 8 | Seals |
| 718/600 AMB | 600 | 730 | 60 | Bearings, units and housings |
| OKBS 136 | 136 | - | - | |
| NN 3040 K/SPW33 | 200 | 310 | 82 | Bearings, units and housings |
| PCMF 081007.5 E | 8 | 10 | 7.5 | Bearings, units and housings |
| SAF 1622 x 4 TLC | 101.6 | - | - | Bearings, units and housings |
Hot number:
12336
13509
26x47x7 HMSA10 RG
280x320x18 HDS1 R
313038 A
414753
594163
6208-2Z/VA208
BB1B 630533
FSNL 526
NJ 308 ECPH
PFT 40 WF
SAF 22532 x 5.3/8 T
SNW 124x4.3/16
W 626-2RS1
Previous:SSAFS 22528 Bearings, units and housings ---- Next:SSAFS 22528 TLC Bearings, units and housings
Return to SKF bearing