da | 122.237 | mm | |
Da | 250 | mm | |
Ca | 77.8 | mm | |
A1 | 149.225 | mm | |
A2 | 193.675 | mm | |
S | 4.763 | mm | |
ba | 61.119 | mm | |
H | 305.594 | mm | |
H1 | 152.4 | mm | |
H2 | 60.325 | mm | |
J | min. | 396.875 | mm |
J | max. | 441.325 | mm |
J1 | 85.725 | mm | |
L | 511.175 | mm | |
N1 | 28.575 | mm | |
Threaded holes | |||
R1 | 87.313 | mm | |
R2 | 38.1 | mm | |
RG | 3/4 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 51.594 | mm |
Housing |
SAF 528
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-28-0
|
|||
Labyrinth ring |
2 x LOR 120
|
|||
|
End plug (suffix Y) |
EPR 27
|
Bearing limiting speed | 3200 | r/min |
P60° | 249 | kN | |
P90° | 149 | kN | |
P120° | 94.3 | kN | |
P150° | 85.9 | kN | |
P180° | 103 | kN | |
Pa | 28.5 | kN |
Mass pillow block | 68 | kg |
Cap bolt |
2 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 799.9 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
3/8-16 UNC
|
|||
Appropriate attachment bolt size | G | 1 | in | |
Initial grease fill | 481.95 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
150x200x12 HMSA10 RG | 150 | 200 | 12 | Seals |
---|---|---|---|---|
16007/HR11TN | 35 | 62 | 9 | Bearings, units and housings |
32555 | 82.55 | 119.84 | 11.13 | Seals |
65x97x7 HMSA10 RG | 65 | 97 | 7 | Seals |
89947 | - | - | 59.995 | Seals |
GEP 950 FS | 950 | 1360 | 635 | Bearings, units and housings |
NA 4905 | 25 | 42 | 17 | Bearings, units and housings |
NCF 3040 CV | 200 | 310 | 82 | Bearings, units and housings |
NUP 320 ECJ | 100 | 215 | 47 | Bearings, units and housings |
SAF 22528 x 5 | 127 | - | - | Bearings, units and housings |
SAFS 22236 T | 180 | - | - | Bearings, units and housings |
W 6005-2Z | 25 | 47 | 12 | Bearings, units and housings |
Hot number:
1500510
21x35x7 HMSA10 V
2200569
312967 E
313528 C
4216 ATN9
61820
7305 ACCBM
7020 ACB/P4A
BT1B 334140/HA4
GS 81104
NKI 30/30 TN
NKXR 20
PCM 222525 E
SYR 3 7/16-18
Previous:SAF 22528 TLC Bearings, units and housings ---- Next:SAF 22528 x 4.13/16 T Bearings, units and housings
Return to SKF bearing