|
||||
Housing material | Cast iron |
d | 55 | mm | |
A | 48 | mm | |
A1 | 18 | mm | |
A3 | H14 | 3.2 | mm |
B1 | 62 | mm | |
Da | H11 | 161.9 | mm |
Db1 | 140 | mm | |
Db2 | 140 | mm | |
J | 143 | mm | |
L | 175 | mm | |
N | 19 | mm | |
s1 | ≈ | 33.8 | mm |
T | 62.8 | mm | |
Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 28.5 | mm | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 161 | mm | |
J7 | 49.5 | mm | |
N4 | 4 | mm |
Basic dynamic load rating | C | 52.7 | kN | |
Basic static load rating | C0 | 36 | kN | |
Fatigue load limit | Pu | 1.53 | kN | |
Limiting speed | 3400 | r/min |
Mass bearing unit | 4 | kg |
Appropriate spanner | HN 12-13 | |||
Recommended lock nut tightening angle | a | 95 | ° | |
Recommended diameter for attachment bolts, mm | G | 16 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.625 | in |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1700280 | 431.8 | 469.9 | 15.875 | Seals |
---|---|---|---|---|
26238 | 66.675 | 92.02 | 9.53 | Seals |
315933 | 630 | 780 | 56 | Bearings, units and housings |
6208-2RSH | 40 | 80 | 18 | Bearings, units and housings |
7034 ACD/HCP4AH1 | 170 | 260 | 42 | Bearings, units and housings |
708 CD/P4AH | 8 | 22 | 7 | Bearings, units and housings |
71916 ACD/P4A | 80 | 110 | 16 | Bearings, units and housings |
AOH 24152 | 240 | 260 | 202 | Bearings, units and housings |
EE 2 TN9 | 6.35 | 19.05 | 5.556 | Bearings, units and housings |
H 2320 | 90 | 130 | 97 | Bearings, units and housings |
LS 6590 | 65 | 90 | 5.25 | Bearings, units and housings |
NJ 307 ECJ | 35 | 80 | 21 | Bearings, units and housings |
Hot number:
29444 E
404504
55x70x10 HMS5 V
6307-RSH
7008 ACD/P4A
71914 CB/P4AL
71916 CD/HCP4AL
72510
FBSA 205/DF
HM 3188
K 8x12x10 TN
LR 20x25x12.5
S71919 ACE/HCP4A
SAF 22220
SAW 23518 x 3.1/4
Previous:FYJ 55 TF Bearings, units and housings ---- Next:FYJ 60 TF Bearings, units and housings
Return to SKF bearing