| Housing material | Cast iron | |||


| d | 38.1 | mm | |
| A | 38.5 | mm | |
| A1 | 14 | mm | |
| A3 | H14 | 3.2 | mm |
| A5 | 26 | mm | |
| B | 36 | mm | |
| B4 | 7 | mm | |
| Da | H11 | 88.9 | mm |
| Db1 | 98 | mm | |
| Db2 | 102 | mm | |
| J | 143.5 | mm | |
| H | 171.5 | mm | |
| L | 102 | mm | |
| N | 14 | mm | |
| s1 | 25.3 | mm | |
| T | 49.3 | mm | |
| Threaded hole | |||
| RG | 1/4-28 UNF | ||
| R1 | 24.5 | mm | |
| Ra | 45 | ° | |
| Grease fitting | |||
| DN | 6.5 | mm | |
| SWN | 7 | mm | |
| GN | 1/4-28 SAE-LT | ||
| Dowel pins | |||
| J6 | 115.5 | mm | |
| J7 | 16 | mm | |
| N4 | 2 | mm | |
| Basic dynamic load rating | C | 30.7 | kN | |
| Basic static load rating | C0 | 19 | kN | |
| Fatigue load limit | Pu | 0.8 | kN | |
| Limiting speed | 4800 | r/min |
(with shaft tolerance h6)
| Thread grub screw | G2 | 5/16-24 UNF | ||
| Hexagonal key size for grub screw | N | 3.969 | mm | |
| Recommended tightening torque for grub screw | 6.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 12 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.5 | in | |
| Housing | ||||
| Bearing | ||||
| End cover | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 11366 | 28.575 | 52.37 | 7.95 | Seals |
|---|---|---|---|---|
| 150x200x12 HMSA10 V | 150 | 200 | 12 | Seals |
| 2317 KM | 85 | 180 | 60 | Bearings, units and housings |
| 2312 K | 60 | 130 | 46 | Bearings, units and housings |
| 470901 | 871 | - | - | Seals |
| 51106 V/HR22T2 | 30 | 47 | 11 | Bearings, units and housings |
| 80x95x10 HMSA10 V | 80 | 95 | 10 | Seals |
| FYK 508 | - | - | - | Bearings, units and housings |
| AXW 25 | 25 | 45 | 2 | Bearings, units and housings |
| GEH 40 ES-2LS | 40 | 68 | 40 | Bearings, units and housings |
| SY 35 FM | 35 | - | - | Bearings, units and housings |
| W 618/0.6 | 0.6 | 2.5 | 1 | Bearings, units and housings |
Hot number:
208
23756
407500
595079
7005 ACE/P4AL
7012 ACB/P4AL
72539
99108
BT2B 332605 A/HA1
C 39/1060 MB
FSAF 1616
SAFS 22516-11 T
TUJ 509
W 638/4 X-2Z
Z 014 F
Previous:FYTB 1.1/2 LDW Bearings, units and housings ---- Next:FYTB 1.1/2 TDW Bearings, units and housings
Return to SKF bearing