
| d | 55 | mm | |
| D | 120 | mm | |
| B | 43 | mm | |
| d2 | ≈ | 70.1 | mm |
| D1 | ≈ | 102 | mm |
| b | 5.5 | mm | |
| K | 3 | mm | |
| r1,2 | min. | 2 | mm |
Tapered bore, taper 1:12

| Da | max. | 109 | mm |
| ra | max. | 2 | mm |
| Basic dynamic load rating | C | 280 | kN | |
| Basic static load rating | C0 | 280 | kN | |
| Fatigue load limit | Pu | 30 | kN | |
| Reference speed | 4300 | r/min | ||
| Limiting speed | 5600 | r/min | ||
| Calculation factor | e | 0.35 | ||
| Calculation factor | Y1 | 1.9 | ||
| Calculation factor | Y2 | 2.9 | ||
| Calculation factor | Y0 | 1.8 | ||
| Permissible rotational acceleration (oil lubrication) | 765 | g [m/s²] | ||
| Permissible linear acceleration (oil lubrication) | 255 | g [m/s²] |
| Mass bearing | 2.4 | kg |
| Recommended lock nut tightening angle | a | 115 | ° |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 17444 | 44.45 | 66.62 | 7.95 | Seals |
|---|---|---|---|---|
| 3208 ATN9 | 40 | 80 | 30.2 | Bearings, units and housings |
| 34x48x8 CRW1 V | 34 | 48 | 8 | Seals |
| 52408 | 30 | 90 | 65 | Bearings, units and housings |
| 625 | 5 | 16 | 5 | Bearings, units and housings |
| 90841 | - | - | 40 | Seals |
| GB 3019 | - | - | 56 | Bearings, units and housings |
| H 3132 E | 140 | 160 | 119 | Bearings, units and housings |
| OH 3072 H | 340 | 360 | 188 | Bearings, units and housings |
| SNL 3056 | 180 | - | - | Bearings, units and housings |
| SNL 3068 TURT | 320 | - | - | Bearings, units and housings |
| SYWK 50 LTHR | 50 | - | - | Bearings, units and housings |
Hot number:
150x180x12 HMS5 V
31299
3203 ATN9
46950
60x75x8 HMSA10 RG
7038 ACD/P4AH1
BT4B 328732/HA1
BT4B 328955 ABG/HA1VA902
FYTB 45 TF
IR 40x45x17
KML 32
NNC 4952 CV
NU 316 ECM
SIL 35 TXE-2LS
SNW 118x3.3/16
Previous:BD-22311 EK-H 2311 Bearings, units and housings ---- Next:22312 E Bearings, units and housings
Return to SKF bearing