da | 55 | mm | |
db | 65.075 | mm | |
dc | 52.375 | mm | |
Da | 120 | mm | |
Ca | 52.807 | mm | |
A1 | 79.375 | mm | |
A2 | 196.85 | mm | |
S | 4.763 | mm | |
ba | 36.513 | mm | |
H | 157.162 | mm | |
H1 | 82.55 | mm | |
H2 | 30.163 | mm | |
J | min. | 206.375 | mm |
J | max. | 241.3 | mm |
J1 | 50.8 | mm | |
L | 279.4 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 44.45 | mm | |
R2 | 25.4 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 36.513 | mm |
End plug (suffix Y) |
EPR 6
|
Max. speed for Taconite seal | 1200 | r/min |
P60° | 35.6 | kN | |
P90° | 21.4 | kN | |
P120° | 13.3 | kN | |
P150° | 12 | kN | |
P180° | 14.2 | kN | |
Pa | 8.9 | kN |
Mass pillow block | 12.2 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 68.04 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
14867 | 38.1 | 52.37 | 7.95 | Seals |
---|---|---|---|---|
15975 | 40.4876 | 70.05 | 7.95 | Seals |
23030 | 58.7502 | 76.12 | 9.53 | Seals |
593037 | 355.6 | - | - | Seals |
700 VRME R | 680 | - | - | Seals |
71902 CE/P4A | 15 | 28 | 7 | Bearings, units and housings |
FSAF 22615 x 2.3/8 TLC | 60.325 | - | - | Bearings, units and housings |
FYT 40 TF/VA228 | 40 | - | 54.2 | Bearings, units and housings |
KR 72 PPXA | - | 72 | 80 | Bearings, units and housings |
NJ 307 ECJ | 35 | 80 | 21 | Bearings, units and housings |
SAF 1517 x 3 | 76.2 | - | - | Bearings, units and housings |
SNW 124x4.3/16 | 106.3625 | 155.702 | 117.8052 | Bearings, units and housings |
Hot number:
22308 EK
230x260x15 HMSA10 RG
32395
405703
619/600 MA
6206 ETN9
6236
NF 18/1000 ECM/HB1
NJ 2220 ECML
NU 222 ECM/C3VL0241
S71918 CD/P4A
SAF 22518 x 3.1/16 TLC
SNL 3196
SSAFS 22220
WS 89311
Previous:FSAF 22311 Bearings, units and housings ---- Next:FSAF 22312 Bearings, units and housings
Return to SKF bearing