da | 55 | mm | |
db | 65.075 | mm | |
dc | 52.375 | mm | |
Da | 120 | mm | |
Ca | 52.807 | mm | |
A1 | 79.375 | mm | |
A2 | 123.825 | mm | |
S | 4.763 | mm | |
ba | 36.513 | mm | |
H | 157.162 | mm | |
H1 | 82.55 | mm | |
H2 | 30.163 | mm | |
J | min. | 206.375 | mm |
J | max. | 241.3 | mm |
J1 | 50.8 | mm | |
L | 279.4 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 44.45 | mm | |
R2 | 25.4 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 36.513 | mm |
End plug (suffix Y) |
EPR 6
|
Bearing limiting speed | 5600 | r/min |
P60° | 35.6 | kN | |
P90° | 21.4 | kN | |
P120° | 13.3 | kN | |
P150° | 12 | kN | |
P180° | 14.2 | kN | |
Pa | 8.9 | kN |
Mass pillow block | 12.2 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 68.04 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
118x150x12 HMSA10 V | 118 | 150 | 12 | Seals |
---|---|---|---|---|
38x58x10 HMSA10 V | 38 | 58 | 10 | Seals |
42x60x8 CRW1 R | 42 | 60 | 8 | Seals |
7024 CE/HCP4AL | 120 | 180 | 28 | Bearings, units and housings |
71907 ACD/P4A | 35 | 55 | 10 | Bearings, units and housings |
81226 TN | 130 | 190 | 45 | Bearings, units and housings |
HA 307 E | 30.1625 | 35 | 35 | Bearings, units and housings |
NNCL 4844 CV | 220 | 270 | 50 | Bearings, units and housings |
NU 1032 M | 160 | 240 | 38 | Bearings, units and housings |
OKC 090 | 90 | - | ||
PBM 230250350 M1G1 | 230 | 250 | 350 | Bearings, units and housings |
SNL 3140 ATURT | 180 | - | - | Bearings, units and housings |
Hot number:
1525560
1500580
23230-2CS5K/VT143
27426
6038 M
62312-2RS1
85844
AHX 3028
HM 31/710
NUP 10/630 ECMA/HA1
OKCX 670
PCMF 161812 E
S71915 ACE/P4A
SAFS 22540 x 7.1/4
YAR 204-012-2RF
Previous:FSAF 22220 TLC Bearings, units and housings ---- Next:FSAF 22311 T Bearings, units and housings
Return to SKF bearing