Housing material | Cast iron |
d | 41.275 | mm | |
A | 39 | mm | |
A1 | 14 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 26.5 | mm | |
B | 49.2 | mm | |
B4 | 8 | mm | |
Da | H11 | 98.4 | mm |
Db1 | 102 | mm | |
Db2 | 111 | mm | |
J | 148.5 | mm | |
H | 178.5 | mm | |
L | 111 | mm | |
N | 16 | mm | |
s1 | 30.2 | mm | |
T | 54.2 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 24.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 120.5 | mm | |
J7 | 18 | mm | |
N4 | 2 | mm |
Basic dynamic load rating | C | 33.2 | kN | |
Basic static load rating | C0 | 21.6 | kN | |
Fatigue load limit | Pu | 0.915 | kN | |
Limiting speed | 4300 | r/min |
(with shaft tolerance h6)
Thread grub screw | G2 | 5/16-24 UNF | ||
Hexagonal key size for grub screw | N | 3.969 | mm | |
Recommended tightening torque for grub screw | 6.5 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 14 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5625 | in |
Housing | ||||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1350 VA R | 1225 | - | - | Seals |
---|---|---|---|---|
23122-2CS5/VT143 | 110 | 180 | 56 | Bearings, units and housings |
293/800 EM | 800 | 1180 | 230 | Bearings, units and housings |
32397 | 82.55 | 107.92 | 11.13 | Seals |
7005 ACE/P4AL | 25 | 47 | 12 | Bearings, units and housings |
708 ACE/HCP4AH | 8 | 22 | 7 | Bearings, units and housings |
FYNT 75 L | 75 | - | - | Bearings, units and housings |
NJ 244 ECM | 220 | 400 | 65 | Bearings, units and housings |
PBM 708560 M1G1 | 70 | 85 | 60 | Bearings, units and housings |
SAFS 22524 T | 106.3625 | - | - | Bearings, units and housings |
SY 55 TF/VA228 | 55 | - | - | Bearings, units and housings |
W 624-2RS1 | 4 | 13 | 5 | Bearings, units and housings |
Hot number:
1750244
21313 EK
22313 EK
260x320x25 HDS1 V
45550
6006/HR11QN
60x105x8 CRW1 R
BEAS 025057-2RZ
TQO design
NJ 209 ECPH
NU 1017 M/HC5C3
PSMF 354525 A51
SAF 22618 T
SNW 136x6.5/16
SY 45 FM
Previous:FYTB 1.5/16 TF Bearings, units and housings ---- Next:FYTB 1.7/16 FM Bearings, units and housings
Return to SKF bearing