da | 110 | mm | |
db | 123.825 | mm | |
dc | 106.362 | mm | |
Da | 200 | mm | |
Ca | 62.789 | mm | |
A1 | 120.65 | mm | |
A2 | 230.188 | mm | |
S | 4.763 | mm | |
ba | 50.006 | mm | |
H | 244.475 | mm | |
H1 | 125.425 | mm | |
H2 | 52.388 | mm | |
L | 419.1 | mm | |
Threaded holes | |||
R1 | 67.866 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 45.244 | mm |
End plug (suffix Y) |
EPR 14
|
Max. speed for Taconite seal | 625 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 39.6 | kN |
Mass pillow block | 51.7 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Eye bolt |
3/8-16 UNC
|
|||
Initial grease fill | 481.95 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
115x150x12 HMSA10 V | 115 | 150 | 12 | Seals |
---|---|---|---|---|
124020 | 314.96 | 365.125 | - | Seals |
12x26x7 CRW1 R | 12 | 26 | 7 | Seals |
20445 | 51.943 | 72.009 | 15.6972 | Seals |
24x42x8 HMS5 V | 24 | 42 | 8 | Seals |
30x48x8 HMSA10 V | 30 | 48 | 8 | Seals |
560x610x20 HDS1 V | 560 | 610 | 20 | Seals |
BTM 90 ATN9/HCP4CDB | 90 | 140 | 45 | Bearings, units and housings |
C 39/560 KM | 560 | 750 | 140 | Bearings, units and housings |
FYNT 50 F | 50 | - | - | Bearings, units and housings |
FYR 3-18 | 76.2 | - | - | Bearings, units and housings |
PWM 657560 | 65 | 75 | 60 | Bearings, units and housings |
Hot number:
25714
25x35x7 CRW1 V
609/630 MB
BTM 130 ATN9/HCP4CDB
D/W RW4 R
NUH 2336 ECMH
PWTR 2562.2RS
S7214 CD/HCP4A
SNL 3060 TURA
SNL 3072 TURA
SNP 3056x10.7/16
SNW 26x4.7/16
SYR 3 11/16-18
YAR 206-104-2RF/VE495
YAR 212-207-2FW/VA228
Previous:SSAFS 22222 Bearings, units and housings ---- Next:SSAFS 22222 TLC Bearings, units and housings
Return to SKF bearing