Bearing (basic designation) |
2213 K
|
|||
Adapter sleeve | ||||
Locating ring |
2 x FRB 10/120
|
da | 57.15 | mm | |
Ca | 51 | mm | |
Da | 120 | mm | |
Db | 77 | mm | |
A | 110 | mm | |
A1 | 80 | mm | |
H | 150 | mm | |
H1 | 80 | mm | |
H2 | 30 | mm | |
J | 230 | mm | |
L | 275 | mm | |
N | 24 | mm | |
N1 | 18 | mm | |
Dowel pins | |||
J6 | 252 | mm | |
J7 | 29 | mm | |
N4 | max. | 8 | mm |
Seal dimensions | |||
A2L | 122 | mm |
![]() TSN 513 C
| ![]() TSN 513 A
| ![]() 2 x TSN 513 SE
| ![]() ASNH 513-611
|
P0° | 270 | kN | |
P55° | 340 | kN | |
P90° | 205 | kN | |
P120° | 150 | kN | |
P150° | 130 | kN | |
P180° | 170 | kN | |
Pa | 110 | kN |
Q120° | 220 | kN | |
Q150° | 125 | kN | |
Q180° | 110 | kN |
Mass housing | 7.88 | kg |
Cap bolt, size | M 12x70 | |||
Cap bolt, rec. tightening torque | 80 | N·m | ||
Appropriate attachment bolt, size | G | 16 | mm | |
Appropriate attachment bolt, rec. tightening torque | 200 | N·m | ||
Initial grease fill, 20% | 100 | g | ||
Initial grease fill, 40% | 160 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1300250 | 330.2 | 368.3 | 19.05 | Seals |
---|---|---|---|---|
315800 | 820 | 990 | 72 | Bearings, units and housings |
42690/42620 | 77.788 | 127 | 30.163 | Bearings, units and housings |
510/750 F | 750 | 820 | 53 | Bearings, units and housings |
51314 | 70 | 125 | 40 | Bearings, units and housings |
6010/HR11TN | 50 | 80 | 16 | Bearings, units and housings |
6032-2Z | 160 | 240 | 38 | Bearings, units and housings |
6219/HC5C3 | 95 | 170 | 32 | Bearings, units and housings |
71245 | 180.975 | 219.08 | 15.88 | Seals |
87820 | - | - | 50 | Seals |
BT4B 328944 G/HA1VA901 | 440 | 650 | - | Bearings, units and housings |
NA 6914 | 70 | 100 | 54 | Bearings, units and housings |
Hot number:
240/1120 CAF/W33
32211
45x62x8 CRWA1 V
61901-2Z
71944 CD/P4AL
7209 CD/HCP4A
80x140x12 CRW1 R
85106
99181
C 4910 V
L 327249/210
NK 26/20
SNW 138x6.7/8
SSAFS 23052 KA x 9.7/16
W 6002-2RS1/VP311
Previous:SE 512-610 Bearings, units and housings ---- Next:SE 515-612 Bearings, units and housings
Return to SKF bearing