Housing material | Cast iron |
d | 35 | mm | |
A | 34.5 | mm | |
A1 | 13 | mm | |
A3 | H14 | 3.2 | mm |
A5 | 22 | mm | |
B | 42.9 | mm | |
B4 | 6 | mm | |
Da | H11 | 88.9 | mm |
Db1 | 88 | mm | |
Db2 | 96 | mm | |
J | 130 | mm | |
H | 156 | mm | |
L | 96 | mm | |
N | 14 | mm | |
s1 | 25.4 | mm | |
T | 46.4 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 22 | mm | |
Ra | 45 | ° | |
Dowel pins | |||
J6 | 106 | mm | |
J7 | 15 | mm | |
N4 | 2 | mm |
Basic dynamic load rating | C | 25.5 | kN | |
Basic static load rating | C0 | 15.3 | kN | |
Fatigue load limit | Pu | 0.655 | kN | |
Limiting speed | 1100 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 1.2 | kg |
Thread grub screw | G2 | M6x0.75 | ||
Hexagonal key size for grub screw | N | 3 | mm | |
Recommended tightening torque for grub screw | 4 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 12 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5 | in |
Housing |
FYTB 507 M/VZ033
|
|||
Bearing |
End cover |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
118x150x12 HMSA10 V | 118 | 150 | 12 | Seals |
---|---|---|---|---|
16903 | 42.8752 | 69.85 | 9.53 | Seals |
32038 X | 190 | 290 | 64 | Bearings, units and housings |
5606 | 14.3002 | 25.37 | 6.35 | Seals |
6305/VA201 | 25 | 62 | 17 | Bearings, units and housings |
AOH 240/800 G | 750 | 800 | 395 | Bearings, units and housings |
K 90x98x27 | 90 | 98 | 27 | Bearings, units and housings |
KMFE 26 L | 28 | - | 130 | Bearings, units and housings |
NA 4906 | 30 | 47 | 17 | Bearings, units and housings |
S7013 CE/P4A | 65 | 100 | 18 | Bearings, units and housings |
SIL 10 E | 10 | - | 9 | Bearings, units and housings |
W 61810-2RS1 | 50 | 65 | 7 | Bearings, units and housings |
Hot number:
23632
35x50x7 HMSA10 RG
6303-2RSL
728 ACD/P4A
AOH 24164
BD-C 2326 K/VE240-H 2326
FSAF 23024 KATLC x 4.3/16
NU 1038 ML
KMFE 9
OKF 210
PCM 606520 E
SAF 22215 TLC
SAF 23024 KAT x 4
SAW 23234 T
SNL 3052 ATURA
Previous:FYTB 35 LF Bearings, units and housings ---- Next:FYTB 35 TF Bearings, units and housings
Return to SKF bearing