Housing material | Cast iron |
d | 15.875 | mm | |
A | 26 | mm | |
A1 | 11 | mm | |
A3 | H14 | 3.2 | mm |
B | 27.4 | mm | |
B4 | 4 | mm | |
Da | H11 | 50.8 | mm |
Db1 | 50 | mm | |
Db2 | 57 | mm | |
J | 76.5 | mm | |
H | 98.5 | mm | |
L | 57 | mm | |
N | 11.5 | mm | |
s1 | 15.9 | mm | |
T | 32.9 | mm | |
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 19 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 61.5 | mm | |
J7 | 11 | mm | |
N4 | 2 | mm |
Basic dynamic load rating | C | 9.56 | kN | |
Basic static load rating | C0 | 4.75 | kN | |
Fatigue load limit | Pu | 0.2 | kN | |
Limiting speed | 9500 | r/min |
(with shaft tolerance h6)
Mass bearing unit | 0.34 | kg |
Thread grub screw | G2 | #10-32 UNF | ||
Hexagonal key size for grub screw | N | 2.381 | mm | |
Recommended tightening torque for grub screw | 4 | N·m | ||
Recommended diameter for attachment bolts, mm | G | 10 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.375 | in |
Housing | ||||
Bearing |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
12x30x7 HMS5 V | 12 | 30 | 7 | Seals |
---|---|---|---|---|
BD-23184 CKJ/W33-AOH 3184 G | 400 | 700 | 224 | Bearings, units and housings |
2650560 | 673.1 | 723.9 | 22.23 | Seals |
375 VRME R | 367 | - | - | Seals |
44x62x8 CRW1 R | 44 | 62 | 8 | Seals |
6005/HR22Q2 | 25 | 47 | 12 | Bearings, units and housings |
61864 MA | 320 | 400 | 38 | Bearings, units and housings |
6414 | 70 | 180 | 42 | Bearings, units and housings |
9826 | 25.4 | 34.93 | 6.35 | Seals |
BS2-2224-2RS5/VT143 | 120 | 215 | 69 | Bearings, units and housings |
K 55x62x18 | 55 | 62 | 18 | Bearings, units and housings |
S71906 CD/P4A | 30 | 47 | 9 | Bearings, units and housings |
Hot number:
38x50x7 HMS5 V
51213
71906 ACE/HCP4A
85046
90895
99815
BT4-8044 G/HA1VA902
FYT 1.11/16 TF/VA228
GEZ 212 ES
K 110x118x30
NK 24/16
NUP 2309 ECML
OKCX 550
PSM 253225 A51
SAFS 22220-11 TLC
Previous:FYTB 5/8 RM Bearings, units and housings ---- Next:FYTB 50 FM Bearings, units and housings
Return to SKF bearing