|
||||
Housing material | Cast iron |
d | 20 | mm | |
A | 27 | mm | |
A1 | 14 | mm | |
A3 | H14 | 3.2 | mm |
B1 | 35 | mm | |
Da | H11 | 63.5 | mm |
Db1 | 65 | mm | |
Db2 | 68 | mm | |
J | 99 | mm | |
H | 130 | mm | |
L | 68 | mm | |
N | 16 | mm | |
s1 | ≈ | 20.5 | mm |
T | 36.5 | mm | |
Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 18 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 81 | mm | |
J7 | 12 | mm | |
N4 | 2 | mm |
Basic dynamic load rating | C | 14 | kN | |
Basic static load rating | C0 | 7.8 | kN | |
Fatigue load limit | Pu | 0.335 | kN | |
Limiting speed | 7000 | r/min |
Mass bearing unit | 0.64 | kg |
Appropriate spanner | HN 5-6 | |||
Recommended lock nut tightening angle | a | 90 | ° | |
Recommended diameter for attachment bolts, mm | G | 14 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5625 | in |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
20x35x7 HMS5 V | 20 | 35 | 7 | Seals |
---|---|---|---|---|
2225561 | 565.15 | 615.95 | 22.225 | Seals |
50x80x10 HMS5 V | 50 | 80 | 10 | Seals |
528535 | 431.8 | - | - | Seals |
AHX 3224 G | 115 | 120 | 90 | Bearings, units and housings |
BD-C 2216 KV-AH 316 | 75 | 140 | 33 | Bearings, units and housings |
FYTB 1.3/8 WDW | 34.925 | - | - | Bearings, units and housings |
NKXR 45 Z | 45 | 58 | 32 | Bearings, units and housings |
NUP 209 ECJ | 45 | 85 | 19 | Bearings, units and housings |
S71918 CE/P4A | 90 | 125 | 18 | Bearings, units and housings |
SAF 22530 x 5.5/16 TLC | 134.9375 | - | - | Bearings, units and housings |
XHCE 055/OK 170 | 170 | 425 | - | Coupling systems |
Hot number:
15234
249/710 CA/W33
32x55x10 HMS5 V
60012
99630
GS 89307
NNCF 4960 CV
NU 224 ECM
NU 2315 ECML
NUKR 80 XA
OKF 260
S7000 CE/HCP4A
SAF 22534 x 5.7/8 T
SAW 23532 T
WS 81138
Previous:FYTJ 20 TF Bearings, units and housings ---- Next:FYTJ 25 TF Bearings, units and housings
Return to SKF bearing