|
||||
Housing material | Cast iron |
d | 35 | mm | |
A | 36 | mm | |
A1 | 16 | mm | |
A3 | H14 | 3.2 | mm |
B1 | 46 | mm | |
Da | H11 | 88.9 | mm |
Db1 | 97 | mm | |
Db2 | 100 | mm | |
J | 144 | mm | |
H | 175 | mm | |
L | 100 | mm | |
N | 16 | mm | |
s1 | ≈ | 27.5 | mm |
T | 48.5 | mm | |
Value for s1 before the sleeve is driven into the bearing bore (sleeve and inner ring bore at starting position). |
|||
Threaded hole | |||
RG | 1/4-28 UNF | ||
R1 | 21.5 | mm | |
Ra | 45 | ° | |
Grease fitting | |||
DN | 6.5 | mm | |
SWN | 7 | mm | |
GN | 1/4-28 SAE-LT | ||
Dowel pins | |||
J6 | 116 | mm | |
J7 | 16 | mm | |
N4 | 2 | mm |
Basic dynamic load rating | C | 30.7 | kN | |
Basic static load rating | C0 | 19 | kN | |
Fatigue load limit | Pu | 0.8 | kN | |
Limiting speed | 4800 | r/min |
Mass bearing unit | 1.65 | kg |
Appropriate spanner | HN 8-9 | |||
Recommended lock nut tightening angle | a | 105 | ° | |
Recommended diameter for attachment bolts, mm | G | 14 | mm | |
Recommended diameter for attachment bolts, inch | G | 0.5625 | in |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
14808 | 38.1 | 47.6 | 4.78 | Seals |
---|---|---|---|---|
1900566 | 482.6 | 533.4 | 22.23 | Seals |
BD-23134 CCK/W33-H 3134 | 150 | 280 | 88 | Bearings, units and housings |
31855 | 80.9752 | 114.33 | 11.13 | Seals |
3213 A-2Z | 65 | 120 | 38.1 | Bearings, units and housings |
36x47x7 HMSA10 RG | 36 | 47 | 7 | Seals |
55x100x12 HMSA10 RG | 55 | 100 | 12 | Seals |
7088 BM | 440 | 650 | 94 | Bearings, units and housings |
PBM 658090 M1G1 | 65 | 80 | 90 | Bearings, units and housings |
SAFS 23038 KA x 7 | 177.8 | - | - | Bearings, units and housings |
SNL 3048 | 150.8125 | - | - | Bearings, units and housings |
SNL 3180 ATURT | 380 | - | - | Bearings, units and housings |
Hot number:
125x200x15 HMS5 V
25x38x7 CRW1 V
29675/29620
37320
42x60x8 CRW1 R
64993
7018 CD/P4AL
71901 CD/P4A
FY 1.3/16 TF
LR 30x35x12.5
NA 4906 RS
NUP 2205 ECP
NKI 15/16
SNL 3144 ATURT
W 619/9 R
Previous:FYTJ 35 TF Bearings, units and housings ---- Next:FYTJ 40 TF Bearings, units and housings
Return to SKF bearing