| Material | Pressed steel | |||


| d | 30 | mm | |
| A | 41 | mm | |
| A1 | 27 | mm | |
| B1 | 48.4 | mm | |
| H | 78 | mm | |
| H1 | 39.3 | mm | |
| H2 | 5 | mm | |
| J | 106 | mm | |
| L | 130 | mm | |
| N | 11.2 | mm | |
| s1 | 30.1 | mm |
| Basic dynamic load rating | C | 19.5 | kN | |
| Basic static load rating | C0 | 11.2 | kN | |
| Fatigue load limit | Pu | 0.475 | kN | |
| Permissible radial housing load | max. | 3.3 | kN | |
| Limiting speed | 6300 | r/min |
(with shaft tolerance h6)
| Mass bearing unit | 0.68 | kg |
| Hexagonal key size for grub screw | N | 4 | mm | |
| Recommended tightening torque for grub screw | 6.5 | N·m | ||
| Recommended diameter for attachment bolts, mm | G | 10 | mm | |
| Recommended diameter for attachment bolts, inch | G | 0.375 | in |
| Housing | ||||
| Bearing | ||||
| Rubber seating ring | ||||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 210 NR | 50 | 90 | 20 | Bearings, units and housings |
|---|---|---|---|---|
| 239/500 CA/W33 | 500 | 670 | 128 | Bearings, units and housings |
| 450 VA V | 405 | - | - | Seals |
| 7007 ACE/HCP4AL | 35 | 62 | 14 | Bearings, units and housings |
| C 39/630 KM | 630 | 850 | 165 | Bearings, units and housings |
| HM 30/1060 | 100 | - | 1060 | Bearings, units and housings |
| K 18x24x12 | 18 | 24 | 12 | Bearings, units and housings |
| NNCF 4930 CV | 150 | 210 | 60 | Bearings, units and housings |
| NNF 5015 ADB-2LSV | 75 | 115 | 54 | Bearings, units and housings |
| PPM 161815 | 16 | 18 | 15 | Bearings, units and housings |
| SNL 3260 G | 300 | - | - | Bearings, units and housings |
| SYK 35 LF | 35 | - | - | Bearings, units and housings |
Hot number:
16069
230x285x23 HDS1 R
BD-23938 CCK/W33-H 3938
24032 CC/W33
315800
6203/VA201
71909 ACD/P4A
71924 CB/P4A
7256 BM
7315 BECBY
C 3984 KM
NNC 4918 CV
PFT 35 TF
SSAFS 22526 TLC
W 6200-2RS1
Previous:P 72 R-30 TF Bearings, units and housings ---- Next:P 80 Bearings, units and housings
Return to SKF bearing