
| d | 15.875 | mm | |
| D | 18.256 | mm | |
| B | 19.05 | mm | |
| M | 3 | mm | |
| c1 | min. | 0.1 | mm |
| c1 | max. | 0.6 | mm |
| c2 | min. | 0.2 | mm |
| c2 | max. | 1 | mm |
| a | ±8 | 20 | ° |
| Shaft diameter range | min. | 15.585 | mm | |
| Shaft diameter range | max. | 15.611 | mm | |
| Housing bore range | min. | 18.255 | mm | |
| Housing bore range | max. | 18.275 | mm |
| Basic dynamic load rating - radial direction | C | 36 | kN | |
| Basic static load rating - radial direction | C0 | 75 | kN | |
| Specific dynamic load factor | K | 120 | N/mm² | |
| Specific static load factor | K0 | 250 | N/mm² | |
| Factor depending on material and bearing type | KM | 1900 | ||
| Permissible sliding velocity | v | min. | 0 | m/s |
| Permissible sliding velocity | v | max. | 2.5 | m/s |
| Coefficient of friction | µ | min. | 0.02 | |
| Coefficient of friction | µ | max. | 0.2 |
| Mass bushing | 0.0073 | kg |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 10x22x7 HMSA10 RG | 10 | 22 | 7 | Seals |
|---|---|---|---|---|
| 175x200x15 HMS5 RG | 175 | 200 | 15 | Seals |
| 241/600 ECAK30/W33 | 600 | 980 | 375 | Bearings, units and housings |
| 310-2ZNR | 50 | 110 | 27 | Bearings, units and housings |
| 4628 | 11.9126 | 22.23 | 5.56 | Seals |
| 62495 | 158.75 | 190.5 | 12.7 | Seals |
| 6311-2Z | 55 | 120 | 29 | Bearings, units and housings |
| 7304 BE-2RZP | 20 | 52 | 15 | Bearings, units and housings |
| NJ 315 ECML | 75 | 160 | 37 | Bearings, units and housings |
| NKIA 5904 | 20 | 37 | 23 | Bearings, units and housings |
| NUP 2305 ECML | 25 | 62 | 24 | Bearings, units and housings |
| SAFS 22244 TLC | 220 | - | - | Bearings, units and housings |
Hot number:
1222
BD-23134-2CS5K/VT143-H 3134 E
24x50x10 HMSA10 V
29422 E
44x60x10 HMS5 V
85469
HA 3130
IR 85x95x36
NU 311 ECML
OKC 790
RNU 209 ECJ
SI 15 C
SNW 11x1.3/4
YET 207-105
XHCE 055/OK 160
Previous:PCZ 1012 E Bearings, units and housings ---- Next:PCZ 1014 E Bearings, units and housings
Return to SKF bearing