da | 65 | mm | |
db | 77.787 | mm | |
dc | 61.913 | mm | |
Da | 120 | mm | |
Ca | 39.014 | mm | |
A1 | 79.375 | mm | |
A2 | 190.5 | mm | |
ba | 27.781 | mm | |
H | 147.637 | mm | |
H1 | 76.2 | mm | |
H2 | 25.4 | mm | |
J | min. | 206.375 | mm |
J | max. | 241.3 | mm |
L | 279.4 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 44.45 | mm | |
R2 | 15.875 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 30.163 | mm |
End plug (suffix Y) |
EPR 7
|
Max. speed for Taconite seal | 1000 | r/min |
P60° | 50.3 | kN | |
P90° | 30.2 | kN | |
P120° | 17.8 | kN | |
P150° | 16 | kN | |
P180° | 19.1 | kN | |
Pa | 12 | kN |
Mass pillow block | 9.07 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 102 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 107.73 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
10104 | 25.4 | 49.23 | 6.35 | Seals |
---|---|---|---|---|
BD-23056 CCK/W33-AOH 3056 | 260 | 420 | 106 | Bearings, units and housings |
47x60x7 CRW1 R | 47 | 60 | 7 | Seals |
619/1060 MB | 1060 | 1400 | 150 | Bearings, units and housings |
FSAF 22516 x 2.5/8 TLC | 66.675 | - | - | Bearings, units and housings |
NJ 2208 ECPH | 40 | 80 | 23 | Bearings, units and housings |
PBM 140160160 M1G1 | 140 | 160 | 160 | Bearings, units and housings |
PNA 40/62 | 40 | 62 | 20 | Bearings, units and housings |
SAF 22609 x 1.1/2 T | 38.1 | - | - | Bearings, units and housings |
SSAFS 23048 KAT x 8.1/2 | 215.9 | - | - | Bearings, units and housings |
YAR 203-008-2F | 12.7 | 40 | 27.4 | Bearings, units and housings |
YSP 210-115 SB-2F | 49.21 | 90 | 37 | Bearings, units and housings |
Hot number:
115x150x12 HMSA10 RG
16009/HR11TN
305272 DB
32x52x7 HMS5 V
35x50x8 HMSA10 V
44295
6020 N
65x80x8 HMSA10 RG
71915 ACE/P4A
FYWK 508 Y
GE 60 CJ2
NNU 4172 M
SAF 1313
SAFS 22216 TLC
SNW 34x5.13/16
Previous:SAF 1213 Bearings, units and housings ---- Next:SAF 1213 TLC Bearings, units and housings
Return to SKF bearing