da | 40 | mm | |
db | 49.212 | mm | |
dc | 36.513 | mm | |
Da | 90 | mm | |
Ca | 42.799 | mm | |
A1 | 60.325 | mm | |
A2 | 101.6 | mm | |
ba | 24.606 | mm | |
H | 125.412 | mm | |
H1 | 63.5 | mm | |
H2 | 25.4 | mm | |
J | min. | 165.1 | mm |
J | max. | 177.8 | mm |
L | 209.55 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 31.75 | mm | |
R2 | 15.875 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 30.956 | mm |
End plug (suffix Y) |
EPR 3
|
Bearing limiting speed | 9500 | r/min |
P60° | 32.5 | kN | |
P90° | 19.6 | kN | |
P120° | 12.5 | kN | |
P150° | 11.1 | kN | |
P180° | 13.8 | kN | |
Pa | 8.9 | kN |
Mass pillow block | 6.54 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 149.1 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 65.205 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
17847 | 45.2374 | 69.85 | 12.7 | Seals |
---|---|---|---|---|
21379 | 53.975 | 92.02 | 11.91 | Seals |
23138 CC/W33 | 190 | 320 | 104 | Bearings, units and housings |
23224-2CS5K/VT143 | 120 | 215 | 76 | Bearings, units and housings |
55x90x10 HMSA10 RG | 55 | 90 | 10 | Seals |
7052 ACD/P4A | 260 | 400 | 65 | Bearings, units and housings |
BA1B 307756 | 1700 | 1900 | 80 | Bearings, units and housings |
BD-C 30/630 KM-AOH 30/630 | 600 | 920 | 212 | Bearings, units and housings |
NU 316 ECML | 80 | 170 | 39 | Bearings, units and housings |
PBM 101616 M1 | 10 | 16 | 16 | Bearings, units and housings |
PCZ 3216 E | 50.8 | 55.5625 | 25.4 | Bearings, units and housings |
Z 014 F | 70 | - | 7 | Seals |
Hot number:
110x130x13 HMS5 RG
17x29x5 HMS5 V
24132 CC/W33
25 VA R
3311 A
360 VE R
51105
529489
6203/HR11QN
6206 N
NA 6911
PCMF 252811.5 E
SAF 22622 x 3.11/16
STO 50
W 630/2-2ZS
Previous:SAF 1222 TLC Bearings, units and housings ---- Next:SAF 1308 T Bearings, units and housings
Return to SKF bearing