da | 34.925 | mm | |
Da | 85.001 | mm | |
Ca | 28.804 | mm | |
A1 | 60.325 | mm | |
A2 | 88.9 | mm | |
S | 4.763 | mm | |
ba | 22.225 | mm | |
H | 112.713 | mm | |
H1 | 57.15 | mm | |
H2 | 20.637 | mm | |
J | min. | 158.75 | mm |
J | max. | 177.8 | mm |
L | 209.55 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 28.575 | mm | |
R2 | 12.7 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 25.4 | mm |
Housing |
SAF 509
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-9-0
|
|||
Labyrinth ring |
2 x LER 16
|
|||
|
End plug (suffix Y) |
EPR 3
|
Bearing limiting speed | 11000 | r/min |
P60° | 20.9 | kN | |
P90° | 12.5 | kN | |
P120° | 7.56 | kN | |
P150° | 6.67 | kN | |
P180° | 8.01 | kN | |
Pa | 2.54 | kN |
Mass pillow block | 5.17 | kg |
Cap bolt |
2 x 7/16-14 UNC
|
|||
Cap bolt recommended tightening torque | 61 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 51.03 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
16004/HR22T2 | 20 | 42 | 8 | Bearings, units and housings |
---|---|---|---|---|
412502 | 1135 | - | - | Seals |
43072 | 109.5502 | 139.73 | 11 | Seals |
6003/HR11QN | 17 | 35 | 10 | Bearings, units and housings |
7044 CD/P4A | 220 | 340 | 56 | Bearings, units and housings |
BSA 306 C | 30 | 72 | 19 | Bearings, units and housings |
C 2216 V | 80 | 140 | 33 | Bearings, units and housings |
CRM 24 A | 76.2 | 177.8 | 39.6875 | Bearings, units and housings |
D/W RW1 R-2Z | 1.397 | 4.762 | 3.571 | Bearings, units and housings |
HJ 238 EC | 190 | 244.2 | 21.5 | Bearings, units and housings |
PCM 9510060 E | 95 | 100 | 60 | Bearings, units and housings |
PF 12 TF | 12 | - | - | Bearings, units and housings |
Hot number:
135x170x15 CRSH1 R
2202 ETN9
BD-240/1000 CAK30F/W33-AOH 240/1000
510 VRME R
525034
539/532 X
6 VS V
61916-2RS1
99266
99835
FNL 506 B
FY 40 FM
FYTWR 1.3/8 YTHR
SAF 22532
SAF 22626
Previous:SAF 1509 x 1.1/2 Bearings, units and housings ---- Next:SAF 1509 x 1.3/8 T Bearings, units and housings
Return to SKF bearing