da | 49.212 | mm | |
Da | 100 | mm | |
Ca | 30.785 | mm | |
A1 | 69.85 | mm | |
A2 | 98.425 | mm | |
S | 4.763 | mm | |
ba | 25.4 | mm | |
H | 133.35 | mm | |
H1 | 69.85 | mm | |
H2 | 23.813 | mm | |
J | min. | 187.325 | mm |
J | max. | 209.55 | mm |
L | 244.475 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 34.131 | mm | |
R2 | 15.875 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 31.75 | mm |
Housing |
SAF 511
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-11-9
|
|||
Labyrinth ring |
2 x LER 24
|
|||
|
End plug (suffix Y) |
EPR 5
|
Bearing limiting speed | 9000 | r/min |
P60° | 44.9 | kN | |
P90° | 27.1 | kN | |
P120° | 17.3 | kN | |
P150° | 15.6 | kN | |
P180° | 19.1 | kN | |
Pa | 3.47 | kN |
Mass pillow block | 8.04 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 102 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 82.215 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
11138 | 28.575 | 44.5 | 6.35 | Seals |
---|---|---|---|---|
120x140x12 CRWA1 R | 120 | 140 | 12 | Seals |
16440 | 41.275 | 82.58 | 12.7 | Seals |
36x65x8 CRW1 R | 36 | 65 | 8 | Seals |
59999 | 152.4 | 171.45 | 12.7 | Seals |
AHX 2324 G | 115 | 120 | 105 | Bearings, units and housings |
S7009 CB/P4A | 45 | 75 | 16 | Bearings, units and housings |
S71908 ACB/HCP4A | 40 | 62 | 12 | Bearings, units and housings |
SD 35x42x4 | 35 | 42 | 4 | Seals |
SSAFS 22520 TLC | 87.3125 | - | - | Bearings, units and housings |
SSAFS 22522 | 100.0125 | - | - | Bearings, units and housings |
SYNT 80 L | 80 | - | - | Bearings, units and housings |
Hot number:
10515
10x25x7 HMS5 V
1100104
170x190x15 CRSH1 R
23026-2CS5K/VT143
40x90x12 HMSA10 V
61908
7414 BCBM
89422 M
P 20 RM
PCMW 203601.5 M
RNAO 17x25x13
RNU 2205 ECP
S7206 ACD/P4A
SAF 22340 T
Previous:SAF 1510-210 Bearings, units and housings ---- Next:SAF 1511 T Bearings, units and housings
Return to SKF bearing