da | 88.9 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 222.25 | mm | |
ba | 38.894 | mm | |
H | 217.488 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
L | 387.35 | mm | |
N1 | 25.4 | mm | |
Threaded holes | |||
R1 | 58.737 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.069 | mm |
Housing |
SAF 520
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1520
|
|||
Taconite seal | TER 103 | |||
|
End plug (suffix Y) |
EPR 12
|
Max. speed for Taconite seal | 900 | r/min |
P60° | 136 | kN | |
P90° | 81.4 | kN | |
P120° | 50.7 | kN | |
P150° | 46.3 | kN | |
P180° | 55.6 | kN | |
Pa | 10.2 | kN |
Mass pillow block | 28.1 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 365.71 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
102540 | 260.35 | 311.15 | 15.88 | Seals |
---|---|---|---|---|
35x48x8 CRW1 V | 35 | 48 | 8 | Seals |
524222 | 901.7 | - | - | Seals |
7011 ACB/P4AL | 55 | 90 | 18 | Bearings, units and housings |
7034 ACD/P4A | 170 | 260 | 42 | Bearings, units and housings |
BA1B 307756 | 1700 | 1900 | 80 | Bearings, units and housings |
BD-C 2238 K-H 3138 | 170 | 340 | 92 | Bearings, units and housings |
HA 2318 E/L73 | 80.9625 | 90 | 73 | Bearings, units and housings |
IR 7x10x12 | 7 | 10 | 12 | Bearings, units and housings |
NU 2311 ECPH | 55 | 120 | 43 | Bearings, units and housings |
OKC 510 | 510 | - | ||
PCM 657070 E | 65 | 70 | 70 | Bearings, units and housings |
Hot number:
20004
314419
331081 A
36391
61912-2RZ
6312-2RSH
71910 ACE/P4AH1
7202 BECBP
7207 BEGAY
BK 2518 RS
C 3972 KM
NU 406
PCZ 0508 E
RNU 2206 ECP
S71909 CB/P4A
Previous:SAF 1520 x 3.1/2 Bearings, units and housings ---- Next:SAF 1520 x 3.1/2 TLC Bearings, units and housings
Return to SKF bearing