da | 100.013 | mm | |
Da | 200 | mm | |
Ca | 62.789 | mm | |
A1 | 120.65 | mm | |
A2 | 165.1 | mm | |
ba | 42.069 | mm | |
H | 239.316 | mm | |
H1 | 125.425 | mm | |
H2 | 50.8 | mm | |
J | min. | 320.675 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 67.866 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 45.244 | mm |
Housing |
SAF 522
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1522
|
|||
Labyrinth ring |
2 x LOR 109
|
|||
|
End plug (suffix Y) |
EPR 13
|
Bearing limiting speed | 4300 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 12.5 | kN |
Mass pillow block | 33.1 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 481.95 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
220x250x15 HMS5 V | 220 | 250 | 15 | Seals |
---|---|---|---|---|
419502 | 1765 | - | - | Seals |
407252 | 670 | - | - | Seals |
45x55x7 HMSA10 RG | 45 | 55 | 7 | Seals |
6024 MA | 120 | 180 | 28 | Bearings, units and housings |
6231 | 15.875 | 28.55 | 9.5 | Seals |
70x88x8 CRW1 R | 70 | 88 | 8 | Seals |
KR 32 B | - | 32 | 40 | Bearings, units and housings |
NA 4909 RS | 45 | 68 | 22 | Bearings, units and housings |
NU 2226 ECP | 130 | 230 | 64 | Bearings, units and housings |
W 635 R | 5 | 19 | 6 | Bearings, units and housings |
YAR 209-111-2FW/VA228 | 42.862 | 85 | 49.2 | Bearings, units and housings |
Hot number:
22x47x7 HMS5 RG
230/530 CA/W33
28x47x10 HMSA10 RG
29866
33017/DF
470586
65390/65320
8178
85907
H 3030
JM 718149/110
NU 1980 ECMA
SAF 22312 T
SNW 3038x6.15/16
W 619/5 X-2Z
Previous:SAF 1520 x 3.5/16 TLC Bearings, units and housings ---- Next:SAF 1522 T Bearings, units and housings
Return to SKF bearing