da | 53.975 | mm | |
Da | 140 | mm | |
Ca | 57.785 | mm | |
A1 | 88.9 | mm | |
A2 | 134.938 | mm | |
ba | 32.544 | mm | |
H | 167.481 | mm | |
H1 | 88.9 | mm | |
H2 | 31.75 | mm | |
J | min. | 244.475 | mm |
J | max. | 279.4 | mm |
L | 330.2 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 53.181 | mm | |
R2 | 21.431 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 36.513 | mm |
Housing |
SAF 613
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1613
|
|||
Labyrinth ring |
2 x LOR 31
|
|||
|
End plug (suffix Y) |
EPR 7
|
Bearing limiting speed | 6000 | r/min |
P60° | 83.2 | kN | |
P90° | 49.8 | kN | |
P120° | 30.2 | kN | |
P150° | 26.7 | kN | |
P180° | 31.6 | kN | |
Pa | 6.49 | kN |
Mass pillow block | 17.1 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 298.3 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 175.77 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1040 VRME R | 990 | - | - | Seals |
---|---|---|---|---|
12355 | 31.75 | 44.5008 | 9.9314 | Seals |
126x147x11 CRSA1 R | 126 | 147 | 11 | Seals |
340x380x18 HDS1 V | 340 | 380 | 18 | Seals |
60x85x10 HMS5 V | 60 | 85 | 10 | Seals |
60x85x8 HMS5 RG | 60 | 85 | 8 | Seals |
707 CE/P4A | 7 | 19 | 6 | Bearings, units and housings |
AOH 24160 | 280 | 300 | 224 | Bearings, units and housings |
FYE 2 15/16 | 74.6125 | - | - | Bearings, units and housings |
GS 81113 | 65 | 90 | 5.25 | Bearings, units and housings |
PL 500 | - | - | 42.8752 | Bearings, units and housings |
SAW 23540 x 7.1/4 TLC | 184.15 | - | - | Bearings, units and housings |
Hot number:
249/750 CAK30/W33
6204 ETN9
6204-2Z/VA228
6406
7008 ACB/P4A
719/9 CE/P4AH
BK 1210
FBSA 208/QFC
KRV 16 PPA
NKXR 30
NUP 224 ECP
QJ 1060 N2MA
SIL 70 ES-2RS
SNW 11x1.15/16
W 61701 R-2RS1
Previous:SAF 1613 x 2.1/4 TLC Bearings, units and housings ---- Next:SAF 1613 x 2.1/8 T Bearings, units and housings
Return to SKF bearing