da | 74.612 | mm | |
Da | 180 | mm | |
Ca | 69.799 | mm | |
A1 | 111.125 | mm | |
A2 | 231.775 | mm | |
ba | 38.894 | mm | |
H | 222.25 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
L | 387.35 | mm | |
N1 | 25.4 | mm | |
Threaded holes | |||
R1 | 65.088 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 47.625 | mm |
Housing |
SAF 617
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1617
|
|||
Taconite seal | TER 184 | |||
|
End plug (suffix Y) |
EPR 10
|
Max. speed for Taconite seal | 1050 | r/min |
P60° | 94.3 | kN | |
P90° | 56.5 | kN | |
P120° | 35.6 | kN | |
P150° | 32 | kN | |
P180° | 38.3 | kN | |
Pa | 10.5 | kN |
Mass pillow block | 31.4 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 365.71 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
22338-2CS5/VT143 | 190 | 400 | 132 | Bearings, units and housings |
---|---|---|---|---|
232/670 CA/W33 | 670 | 1220 | 438 | Bearings, units and housings |
470771 | 743 | - | - | Seals |
7017 ACE/P4A | 85 | 130 | 22 | Bearings, units and housings |
7314 BEGAJ | 70 | 150 | 35 | Bearings, units and housings |
FYK 507 | - | - | - | Bearings, units and housings |
BS2-2216-2RS/VT143 | 80 | 140 | 40 | Bearings, units and housings |
C 2316 K | 80 | 170 | 58 | Bearings, units and housings |
NU 1022 ML | 110 | 170 | 28 | Bearings, units and housings |
PSM 202830 A51 | 20 | 28 | 30 | Bearings, units and housings |
SAF 1320 TLC | 100 | - | - | Bearings, units and housings |
W 638/5 R-2Z | 5 | 11 | 5 | Bearings, units and housings |
Hot number:
35x72x7 HMS5 V
49990
6009 NR
7202 BEGAP
89413 TN
AH 3032
FNL 510 A
GEH 80 TXE-2LS
HJ 2322 EC
HJ 330 EC
NU 2217 ECP
PBM 240260140 M1G1
PWM 110125100
SAF 1613 x 2.1/8
W 61701 R-2ZS
Previous:SAF 1617 Bearings, units and housings ---- Next:SAF 1617 TLC Bearings, units and housings
Return to SKF bearing