da | 82.55 | mm | |
Da | 190 | mm | |
Ca | 73.787 | mm | |
A1 | 111.125 | mm | |
ba | 42.069 | mm | |
H | 230.981 | mm | |
H1 | 120.65 | mm | |
H2 | 50.8 | mm | |
J | min. | 304.8 | mm |
J | max. | 342.9 | mm |
J1 | 57.15 | mm | |
L | 393.7 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 73.025 | mm | |
R2 | 28.575 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 50.8 | mm |
Housing |
SAF 618
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1618
|
|||
Taconite seal | TER 189 | |||
|
End plug (suffix Y) |
EPR 11
|
Max. speed for Taconite seal | 950 | r/min |
P60° | 128 | kN | |
P90° | 77 | kN | |
P120° | 48.9 | kN | |
P150° | 44.5 | kN | |
P180° | 54.3 | kN | |
Pa | 11.6 | kN |
Mass pillow block | 41.1 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 481.95 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
24132 CC/W33 | 160 | 270 | 109 | Bearings, units and housings |
---|---|---|---|---|
592934 | 412.75 | - | - | Seals |
707 CD/HCP4AH | 7 | 19 | 6 | Bearings, units and housings |
708 CE/HCP4AH | 8 | 22 | 7 | Bearings, units and housings |
87850 | - | - | 56.388 | Seals |
AH 24122 | 105 | 110 | 82 | Bearings, units and housings |
GEH 30 TXE-2LS | 30 | 55 | 20 | Bearings, units and housings |
IR 8x12x10 | 8 | 12 | 10 | Bearings, units and housings |
LR 25x30x38.5 | 25 | 30 | 38.5 | Bearings, units and housings |
SAF 22524 x 4.1/16 TLC | 103.1875 | - | - | Bearings, units and housings |
SYFWR 3/4 YZTHR | 19.05 | - | - | Bearings, units and housings |
YAR 213-208-2F | 63.5 | 120 | 68.3 | Bearings, units and housings |
Hot number:
17523
19782
BD-22230 CCK/W33-AHX 3130 G
30307
350x380x16 HDS2 V
49274
510/500 F
6206/VA201
7017 CB/HCP4AL
7019 ACE/P4AL
71912 ACB/P4AL
970 VRME R
HM 3044
LM 48548/510
SYE 1 11/16-3
Previous:SAF 1618 x 3.1/4 Bearings, units and housings ---- Next:SAF 1618 x 3.1/4 TLC Bearings, units and housings
Return to SKF bearing