

| d | 16 | mm | |
| D | 18 | mm | |
| B | 17 | mm | |
| D1 | 24 | mm | |
| B1 | 1 | mm | |
| c1 | min. | 0.1 | mm |
| c1 | max. | 0.6 | mm |
| c2 | min. | 0.2 | mm |
| c2 | max. | 1 | mm |
| a | ±8 | 20 | ° |
| r | max. | 1 | mm |
| Tolerance shaft | f7 | |||
| Tolerance housing | H7 | |||
| Basic dynamic load rating - radial direction | C | 18.6 | kN | |
| Basic static load rating - radial direction | C0 | 58.5 | kN | |
| Basic dynamic load rating - axial direction | Ca | 8.5 | kN | |
| Basic static load rating - axial direction | C0a | 26.5 | kN | |
| Specific dynamic load factor | K | 80 | N/mm² | |
| Specific static load factor | K0 | 250 | N/mm² | |
| Factor depending on material and bearing type | KM | 480 | ||
| Permissible sliding velocity | v | min. | 0 | m/s |
| Permissible sliding velocity | v | max. | 2 | m/s |
| Coefficient of friction | µ | min. | 0.03 | |
| Coefficient of friction | µ | max. | 0.25 |
| Mass bushing | 0.0081 | kg |
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 25x46x7 HMSA10 V | 25 | 46 | 7 | Seals |
|---|---|---|---|---|
| 25x52x8 HMSA10 RG | 25 | 52 | 8 | Seals |
| 61828 | 140 | 175 | 18 | Bearings, units and housings |
| 61914-2RS1 | 70 | 100 | 16 | Bearings, units and housings |
| 7024 CD/HCP4AL | 120 | 180 | 28 | Bearings, units and housings |
| C 3060 KM | 300 | 460 | 118 | Bearings, units and housings |
| GE 110 ES | 110 | 160 | 70 | Bearings, units and housings |
| HM 804846/810 | 47.625 | 95.25 | 30.162 | Bearings, units and housings |
| P 72 R-30 WF | 30 | - | - | Bearings, units and housings |
| SAF 23024 KATLC x 4.3/16 | 106.3625 | - | - | Bearings, units and housings |
| SAFS 23038 KATLC x 7 | 177.8 | - | - | Bearings, units and housings |
| SAW 23520 x 3.1/2 TLC | 88.9 | - | - | Bearings, units and housings |
Hot number:
25x52x8 HMSA10 RG
344/332 AA
455 VRME R
6213 NR
7308 BE-2RZP
81111 TN
81113 TN
81115 TN
BEAM 025075-2RZ/PE
IR 25x30x20
NF 18/1000 ECM/HB1
NU 209 ECPH
NX 17 Z
SI 25 ES
SSAFS 23038 KATLC x 6.13/16
Previous:PCMF 161812 E Bearings, units and housings ---- Next:PCMF 182012 E Bearings, units and housings
Return to SKF bearing