da | 96.838 | mm | |
Da | 240 | mm | |
Ca | 89.789 | mm | |
A1 | 133.35 | mm | |
A2 | 206.375 | mm | |
ba | 48.419 | mm | |
H | 287.337 | mm | |
H1 | 152.4 | mm | |
H2 | 60.325 | mm | |
J | min. | 371.475 | mm |
J | max. | 406.4 | mm |
J1 | 82.55 | mm | |
L | 466.725 | mm | |
N1 | 25.4 | mm | |
Threaded holes | |||
R1 | 79.375 | mm | |
R2 | 36.513 | mm | |
RG | 1/2 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 63.5 | mm |
Housing |
SAF 622
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x SR-1622
|
|||
Labyrinth ring |
2 x LOR 107
|
|||
PosiTrac Plus contact element |
2 x B10724-109
|
|||
|
End plug (suffix Y) |
EPR 13
|
Max. speed for PosiTrac Plus seal | 1450 | r/min |
P60° | 189 | kN | |
P90° | 113 | kN | |
P120° | 73.8 | kN | |
P150° | 68.1 | kN | |
P180° | 84.5 | kN | |
Pa | 16.7 | kN |
Mass pillow block | 62.8 | kg |
Cap bolt |
2 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 1220 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 765.45 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
120 VS V | 108 | - | - | Seals |
---|---|---|---|---|
16286 | 41.275 | 62.5348 | 6.35 | Seals |
25076 | 63.5 | 92.02 | 9.53 | Seals |
31322T140 X/DB | 110 | 240 | - | Bearings, units and housings |
46x65x10 HMS5 V | 46 | 65 | 10 | Seals |
48x68x10 HMS5 RG | 48 | 68 | 10 | Seals |
61215 | 155.575 | 180.98 | 12.7 | Seals |
FYTB 1.1/2 LDW | 38.1 | - | - | Bearings, units and housings |
NJ 309 ECP | 45 | 100 | 25 | Bearings, units and housings |
PWM 202415 | 20 | 24 | 15 | Bearings, units and housings |
SAFS 23048 KAT x 8.7/16 | 214.3125 | - | - | Bearings, units and housings |
SNL 3156 ATURA | 260 | - | - | Bearings, units and housings |
Hot number:
135x170x12 HMS5 RG
33011
6019-Z
6303-2RSH
9520
KM 12
NCF 1872 V
NCF 3048 CV
NK 70/35
NU 1020 M/C3VL0241
NNC 4916 CV
NNU 41/500 M/W33
NNU 4922 B/SPW33
SNL 3096 G
WS 81124
Previous:SAF 1622 x 3.13/16 T Bearings, units and housings ---- Next:SAF 1622 x 3.7/8 Bearings, units and housings
Return to SKF bearing