da | 28.575 | mm | |
Da | 71.999 | mm | |
Ca | 26.797 | mm | |
A1 | 50.8 | mm | |
A2 | 82.55 | mm | |
S | 1.984 | mm | |
ba | 24.606 | mm | |
H | 98.822 | mm | |
H1 | 50.8 | mm | |
H2 | 20.637 | mm | |
J | min. | 142.875 | mm |
J | max. | 155.575 | mm |
L | 190.5 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 23.813 | mm | |
R2 | 12.7 | mm | |
RG | 1/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 22.225 | mm |
Housing |
SAF 507
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
36053-6
|
|||
Labyrinth ring |
2 x LER 14
|
|||
|
End plug (suffix Y) |
EPR 2
|
Bearing limiting speed | 12000 | r/min |
P60° | 18.2 | kN | |
P90° | 11.1 | kN | |
P120° | 6.67 | kN | |
P150° | 5.78 | kN | |
P180° | 7.12 | kN | |
Pa | 2.4 | kN |
Mass pillow block | 4.15 | kg |
Cap bolt |
2 x 3/8-16 UNC
|
|||
Cap bolt recommended tightening torque | 40.7 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 19.845 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
13x26x7 HMSA10 RG | 13 | 26 | 7 | Seals |
---|---|---|---|---|
20127 | 50.8 | 85.62 | 11.12 | Seals |
2305 E-2RS1TN9 | 25 | 62 | 24 | Bearings, units and housings |
BD-23138 CCK/W33-H 3138 | 170 | 320 | 104 | Bearings, units and housings |
27600 | 69.85 | 107.92 | 11.13 | Seals |
401001 | 90 | - | - | Seals |
6373 | 15.875 | 34.93 | 6.35 | Seals |
99423 | 107.5436 | 117.094 | 23.0124 | Seals |
BK 1514 RS | 15 | 21 | 14 | Bearings, units and housings |
FSYE 2 11/16-3 | 68.2625 | - | - | Bearings, units and housings |
FYC 504 | - | - | - | Bearings, units and housings |
SAFS 22517-11 x 2.7/8 T | 73.025 | - | - | Bearings, units and housings |
Hot number:
130x150x14 CRSA1 R
2200 ETN9
22484
411500
89308 TN
D/W R144W.0937-2ZS
FSNL 620 TURU
GS 89322
HA 3040
MS 30/500-96
NUP 2317 ECML
OKC 310
SNL 3038 G
YEL 205-015-2F
YET 211
Previous:SAF 22507 x 1.1/4 T Bearings, units and housings ---- Next:SAF 22507 x 1.1/8 T Bearings, units and housings
Return to SKF bearing