da | 63.5 | mm | |
Da | 130 | mm | |
Ca | 37.008 | mm | |
A1 | 79.375 | mm | |
A2 | 193.675 | mm | |
S | 3.175 | mm | |
ba | 32.544 | mm | |
H | 157.559 | mm | |
H1 | 82.55 | mm | |
H2 | 28.575 | mm | |
J | min. | 219.075 | mm |
J | max. | 244.475 | mm |
L | 285.75 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 46.038 | mm | |
R2 | 21.431 | mm | |
RG | 1/4 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 28.575 | mm |
Housing |
SAF 515
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-15-0
|
|||
Taconite seal | TER 38 | |||
|
End plug (suffix Y) |
EPR 7
|
Max. speed for Taconite seal | 1250 | r/min |
P60° | 75.6 | kN | |
P90° | 45.4 | kN | |
P120° | 28 | kN | |
P150° | 25.4 | kN | |
P180° | 30.2 | kN | |
Pa | 6.94 | kN |
Mass pillow block | 12.7 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 102 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 68.04 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
16065 | 41.275 | 57.15 | 6.35 | Seals |
---|---|---|---|---|
BD-22228-2CS5K/VT143-H 3128 L | 125 | 250 | 68 | Bearings, units and housings |
25x37x7 CRW1 R | 25 | 37 | 7 | Seals |
408903 | 853 | - | - | Seals |
410x460x22 HDS2 R | 410 | 460 | 22 | Seals |
50x80x10 HMS5 V | 50 | 80 | 10 | Seals |
52305 | 20 | 52 | 34 | Bearings, units and housings |
85814 | - | - | 63.5 | Seals |
BT2B 332468 A/HA1 | 368.3 | 523.875 | - | Bearings, units and housings |
HJ 216 EC | 80 | 101.55 | 12.5 | Bearings, units and housings |
NU 2319 ECML | 95 | 200 | 67 | Bearings, units and housings |
W 619/6 R-2Z | 6 | 15 | 5 | Bearings, units and housings |
Hot number:
21043
24034 CCK30/W33
292/500
490x530x20 HDS1 R
70x110x12 HMS5 V
709 CE/P4AH
71913 CD/P4AL
71915 CE/P4A
EEB 3-2Z
FSNL 517
FY 2.7/16 DUTF
KDMS 354-275/110
N 219 ECP
OKCX 870
SNL 3080 TURT
Previous:SAF 22515 x 2.1/2 Bearings, units and housings ---- Next:SAF 22515 x 2.1/2 TLC Bearings, units and housings
Return to SKF bearing