da | 63.5 | mm | |
Da | 130 | mm | |
Ca | 37.008 | mm | |
A1 | 79.375 | mm | |
A2 | 193.675 | mm | |
S | 3.175 | mm | |
ba | 32.544 | mm | |
H | 161.925 | mm | |
H1 | 82.55 | mm | |
H2 | 30.163 | mm | |
L | 285.75 | mm | |
Threaded holes | |||
R1 | 46.038 | mm | |
R2 | 21.431 | mm | |
RG | 1/4 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 28.575 | mm |
Housing |
SSAFS 515
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-15-0
|
|||
Taconite seal | TER 38 | |||
|
End plug (suffix Y) |
EPR 7
|
Max. speed for Taconite seal | 1250 | r/min |
P60° | 75.6 | kN | |
P90° | 45.4 | kN | |
P120° | 28 | kN | |
P150° | 25.4 | kN | |
P180° | 30.2 | kN | |
Pa | 6.94 | kN |
Mass pillow block | 14.3 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 102 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Initial grease fill | 68.04 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
332096 BG | 482.6 | 615.95 | - | Bearings, units and housings |
---|---|---|---|---|
37433 | 95.25 | 123.85 | 11.13 | Seals |
400350 | 31 | - | - | Seals |
6014 | 70 | 110 | 20 | Bearings, units and housings |
6314/VA201 | 70 | 150 | 35 | Bearings, units and housings |
71914 ACE/HCP4A | 70 | 100 | 16 | Bearings, units and housings |
FSAF 1613 x 2.1/8 T | 53.975 | - | - | Bearings, units and housings |
FYTB 40 LF | 40 | - | - | Bearings, units and housings |
HM 52 T | 36 | - | 260 | Bearings, units and housings |
KMTA 19 | 32 | - | 95 | Bearings, units and housings |
NJ 18/800 ECMA | 800 | 980 | 82 | Bearings, units and housings |
NU 220 ECJ | 100 | 180 | 34 | Bearings, units and housings |
Hot number:
230x260x15 HMSA10 V
23180-2CS5/VT143
BD-24132 CCK30/W33-AH 24132
400354
7019 ACB/P4AL
90849
91342
AOH 240/950
D/W R166-2Z
FSYE 3 7/16 N-118
OKF 640
PSM 759070 A51
QJ 212 N2PHAS
S71917 CE/HCP4A
SIKB 18 F
Previous:SSAFS 22515 x 2.1/2 Bearings, units and housings ---- Next:SSAFS 22515 x 2.3/8 Bearings, units and housings
Return to SKF bearing