

| da | 61.913 | mm | |
| Da | 130 | mm | |
| Ca | 37.008 | mm | |
| A1 | 79.375 | mm | |
| A2 | 193.675 | mm | |
| S | 3.175 | mm | |
| ba | 32.544 | mm | |
| H | 161.925 | mm | |
| H1 | 82.55 | mm | |
| H2 | 30.163 | mm | |
| L | 285.75 | mm | |
| Threaded holes | |||
| R1 | 46.038 | mm | |
| R2 | 21.431 | mm | |
| RG | 1/4 NPT | ||
| PG | 1/8 NPT | ||
| Oil level | |||
| h | 28.575 | mm | |
| Housing | SSAFS 515 | |||
| Bearing | ||||
| Adapter sleeve assembly | ||||
| Stabilizing ring | SR-15-0 | |||
| Taconite seal | TER 37 | |||
| 
 | ||||
| End plug (suffix Y) | EPR 7 | |||
| Max. speed for Taconite seal | 1250 | r/min | 

| P60° | 75.6 | kN | |
| P90° | 45.4 | kN | |
| P120° | 28 | kN | |
| P150° | 25.4 | kN | |
| P180° | 30.2 | kN | |
| Pa | 6.94 | kN | 
| Mass pillow block | 14.3 | kg | 
| Cap bolt | 2 x 1/2-13 UNC | |||
| Cap bolt recommended tightening torque | 102 | N·m | ||
| Cap bolt, SAE grade | 5 | |||
| Initial grease fill | 68.04 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type | 
| 14857 | 38.1 | 50.8 | 6.35 | Seals | 
|---|---|---|---|---|
| 230/530 CA/W33 | 530 | 780 | 185 | Bearings, units and housings | 
| 406903 | 670 | - | - | Seals | 
| 592934 | 412.75 | - | - | Seals | 
| 70x90x12 HMS5 V | 70 | 90 | 12 | Seals | 
| C 4024 K30V/VE240 | 120 | 180 | 60 | Bearings, units and housings | 
| FYTWK 504 Y | - | - | - | Bearings, units and housings | 
| NNCF 4976 CV | 380 | 520 | 140 | Bearings, units and housings | 
| NNCL 4844 CV | 220 | 270 | 50 | Bearings, units and housings | 
| NU 214 ECM/HC5C3 | 70 | 125 | 24 | Bearings, units and housings | 
| OKCX 590 | 590 | - | ||
| SAF 22630 x 5.1/8 | 130.175 | - | - | Bearings, units and housings | 
   Hot number:
125x160x12 CRW1 R 
46208 
53.0x69.3x14.2 TPM 
55x100x12 HMSA10 RG 
7016 ACD/P4A 
7017 ACE/HCP4AL1 
90 VS V 
 TQO design 
IR 60x70x25 EGS 
N 05 
NJG 2316 VH 
NN 3007/SP 
NU 2212 ECPH 
SAF 22613 x 2.1/4 T 
SAF 22638 x 6.13/16 TLC 
Previous:SSAFS 22340 TLC Bearings, units and housings ---- Next:SSAFS 22515 TLC Bearings, units and housings
Return to SKF bearing