da | 61.913 | mm | |
Da | 130 | mm | |
Ca | 37.008 | mm | |
A1 | 79.375 | mm | |
A2 | 118.666 | mm | |
S | 3.175 | mm | |
ba | 32.544 | mm | |
H | 157.559 | mm | |
H1 | 82.55 | mm | |
H2 | 28.575 | mm | |
J | min. | 219.075 | mm |
J | max. | 244.475 | mm |
J1 | 47.625 | mm | |
L | 285.75 | mm | |
N1 | 15.875 | mm | |
Threaded holes | |||
R1 | 46.038 | mm | |
R2 | 21.431 | mm | |
RG | 1/4 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 28.575 | mm |
Housing |
FSAF 515
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-15-0
|
|||
Labyrinth ring |
2 x LOR 37
|
|||
|
End plug (suffix Y) |
EPR 7
|
Bearing limiting speed | 6300 | r/min |
P60° | 54.3 | kN | |
P90° | 32.5 | kN | |
P120° | 20 | kN | |
P150° | 18.2 | kN | |
P180° | 22.2 | kN | |
Pa | 6.67 | kN |
Mass pillow block | 12.7 | kg |
Cap bolt |
2 x 1/2-13 UNC
|
|||
Cap bolt recommended tightening torque | 102 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.5 | in | |
Initial grease fill | 68.04 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
100x140x12 CRWA1 R | 100 | 140 | 12 | Seals |
---|---|---|---|---|
25x62x8 HMSA10 V | 25 | 62 | 8 | Seals |
26x42x8 CRS1 R | 26 | 42 | 8 | Seals |
7016 CE/HCP4AH1 | 80 | 125 | 22 | Bearings, units and housings |
C 6006 V | 30 | 55 | 45 | Bearings, units and housings |
FSAF 22615 | 61.9125 | - | - | Bearings, units and housings |
FY 45 TF | 45 | - | - | Bearings, units and housings |
HME 31/670 | 106 | - | 670 | Bearings, units and housings |
K 28x34x17 | 28 | 34 | 17 | Bearings, units and housings |
OKCX 490 | 490 | - | ||
PL 60 | - | - | 34.925 | Bearings, units and housings |
W 6207-2RZ | 35 | 72 | 17 | Bearings, units and housings |
Hot number:
11208 TN9
1303 EM
2316 K
239/950 CAK/W33
32815
3313 A
38x80x8 HMSA10 V
6304/HR11TN
6407 N
NA 4904.2RS
NU 1015 ML
PCZ 2222 E
RSTO 8 TN
SAF 22515 x 2.1/2 TLC
SNW 38x6.15/16
Previous:FSAF 22317 TLC Bearings, units and housings ---- Next:FSAF 22515 T Bearings, units and housings
Return to SKF bearing