da | 68.263 | mm | |
Da | 140 | mm | |
Ca | 42.799 | mm | |
A1 | 88.9 | mm | |
A2 | 209.55 | mm | |
S | 4.763 | mm | |
ba | 34.131 | mm | |
H | 169.863 | mm | |
H1 | 88.9 | mm | |
H2 | 31.75 | mm | |
J | min. | 244.475 | mm |
J | max. | 279.4 | mm |
L | 330.2 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 53.181 | mm | |
R2 | 21.431 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 31.75 | mm |
Housing |
SAF 516
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-16-13
|
|||
Taconite seal | TER 44 | |||
|
End plug (suffix Y) |
EPR 8
|
Max. speed for Taconite seal | 1150 | r/min |
P60° | 83.2 | kN | |
P90° | 49.8 | kN | |
P120° | 30.2 | kN | |
P150° | 26.7 | kN | |
P180° | 31.6 | kN | |
Pa | 7.83 | kN |
Mass pillow block | 16.3 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 87.885 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
22363 | 57.15 | 76.2 | 9.53 | Seals |
---|---|---|---|---|
250x310x25 HDS1 R | 250 | 310 | 25 | Seals |
3311 ATN9 | 55 | 120 | 49.2 | Bearings, units and housings |
6000/HR22Q2 | 10 | 26 | 8 | Bearings, units and housings |
PBM 405040 M1G1 | 40 | 50 | 40 | Bearings, units and housings |
NU 264 ECM | 320 | 580 | 92 | Bearings, units and housings |
NUP 238 ECM | 190 | 340 | 55 | Bearings, units and housings |
P 52 | - | - | - | Bearings, units and housings |
SAFS 22516-11 | 68.2625 | - | - | Bearings, units and housings |
SNL 3184 ATURA | 400 | - | - | Bearings, units and housings |
SNW 111x2 | 50.8 | 55 | 63.6524 | Bearings, units and housings |
SNW 3044x8 | 203.2 | 220 | 130.048 | Bearings, units and housings |
Hot number:
14804
13562
208-Z
22590
25x62x8 HMS5 RG
619/9
6204-2Z
80x110x12 HMS5 V
BC4-8022/HA1
FSAF 1615 x 2.1/2 T
HM 803149/110
NJ 2319 ECP
PCM 220225100 M
SAFS 22517 x 2.7/8
SAFS 23034 KAT x 6
Previous:SAF 22516 Bearings, units and housings ---- Next:SAF 22516 TLC Bearings, units and housings
Return to SKF bearing