da | 76.2 | mm | |
Da | 150 | mm | |
Ca | 45.796 | mm | |
A1 | 88.9 | mm | |
A2 | 198.438 | mm | |
S | 4.763 | mm | |
ba | 35.719 | mm | |
H | 180.975 | mm | |
H1 | 95.25 | mm | |
H2 | 31.75 | mm | |
J | min. | 250.825 | mm |
J | max. | 279.4 | mm |
L | 330.2 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 53.975 | mm | |
R2 | 22.225 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 34.925 | mm |
End plug (suffix Y) |
EPR 9
|
Max. speed for Taconite seal | 1050 | r/min |
P60° | 84.5 | kN | |
P90° | 50.7 | kN | |
P120° | 31.6 | kN | |
P150° | 28.5 | kN | |
P180° | 34.7 | kN | |
Pa | 9.25 | kN |
Mass pillow block | 18 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 110.56 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
120x180x15 HMSA10 V | 120 | 180 | 15 | Seals |
---|---|---|---|---|
13905 | 34.925 | 72 | 7.95 | Seals |
6318/C3VL0241 | 90 | 190 | 43 | Bearings, units and housings |
7008 CE/HCP4A | 40 | 68 | 15 | Bearings, units and housings |
99242 | 61.9252 | 71.8312 | 15.875 | Seals |
FSAF 22516 x 2.5/8 TLC | 66.675 | - | - | Bearings, units and housings |
FY 60 TR | 60 | - | - | Bearings, units and housings |
NJ 2210 ECPH | 50 | 90 | 23 | Bearings, units and housings |
KML 38 | 28 | - | 190 | Bearings, units and housings |
NNU 4964 BK/SPW33 | 320 | 440 | 118 | Bearings, units and housings |
PCM 323640 M | 32 | 36 | 40 | Bearings, units and housings |
RNU 1011 | 64.5 | 90 | 18 | Bearings, units and housings |
Hot number:
15960
16364
590x630x20 HDS1 R
95x145x12 HMSA10 RG
BEAM 035090-2RZ
BTM 130 BTN9/HCP4CDB
GE 120 ES
IR 45x55x22
K 3x5x9 TN
OKBS 112
PRM 707580
PSMF 162212 A51
PSMF 455535 A51
SAF 2513-210
SSAFS 22520 x 3.3/8 T
Previous:SAF 22517 x 3 Bearings, units and housings ---- Next:SAF 22517 x 3 TLC Bearings, units and housings
Return to SKF bearing