da | 101.6 | mm | |
Da | 200 | mm | |
Ca | 62.789 | mm | |
A1 | 120.65 | mm | |
A2 | 165.1 | mm | |
S | 4.763 | mm | |
ba | 50.006 | mm | |
H | 239.316 | mm | |
H1 | 125.425 | mm | |
H2 | 50.8 | mm | |
J | min. | 320.675 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 67.866 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 45.244 | mm |
End plug (suffix Y) |
EPR 13
|
Bearing limiting speed | 4000 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 17.3 | kN |
Mass pillow block | 33.1 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 232.47 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1650255 | 419.1 | 457.2 | 19.05 | Seals |
---|---|---|---|---|
4207 ATN9 | 35 | 72 | 23 | Bearings, units and housings |
6003-2Z/VA208 | 17 | 35 | 10 | Bearings, units and housings |
7308 BEP | 40 | 90 | 23 | Bearings, units and housings |
ECY 213 | - | - | - | Bearings, units and housings |
FY 1.3/4 FM | 44.45 | - | - | Bearings, units and housings |
N 210 ECP | 50 | 90 | 20 | Bearings, units and housings |
NJ 348 ML | 240 | 500 | 95 | Bearings, units and housings |
NKXR 15 Z | 15 | 24 | 23 | Bearings, units and housings |
OKC 420 | 420 | - | ||
S7018 ACD/HCP4A | 90 | 140 | 24 | Bearings, units and housings |
SAFS 22532 TLC | 138.1125 | - | - | Bearings, units and housings |
Hot number:
16072
2214 E-2RS1TN9
27470
36x47x7 HMSA10 RG
40x62x7 HMS5 V
45x68x7 HMSA10 RG
470871
500x550x18 HDS2 D
51132 M
53701
6015 N
64450/64700
FYTBK 30 LD
PPMF 161817
SNW 117x2.13/16
Previous:SAF 22522 x 3.7/8 TLC Bearings, units and housings ---- Next:SAF 22522 x 4 T Bearings, units and housings
Return to SKF bearing