da | 98.425 | mm | |
Da | 200 | mm | |
Ca | 62.89 | mm | |
A1 | 120.65 | mm | |
A2 | 165.1 | mm | |
S | 4.763 | mm | |
ba | 50.006 | mm | |
H | 244.475 | mm | |
H1 | 125.425 | mm | |
H2 | 52.388 | mm | |
J | min. | 320.675 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 67.866 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 45.244 | mm |
Housing |
SAFS 522
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-22-19
|
|||
Labyrinth ring |
2 x LOR 108
|
|||
|
End plug (suffix Y) |
EPR 13
|
Bearing limiting speed | 4000 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 17.3 | kN |
Mass pillow block | 52.2 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 232.47 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
10075 | 25.4 | 47.6 | 6.35 | Seals |
---|---|---|---|---|
470326 | 319 | - | - | Seals |
628/5-2Z | 5 | 11 | 4 | Bearings, units and housings |
91700 | - | - | 63.5 | Seals |
AH 24126 | 125 | 130 | 94 | Bearings, units and housings |
C 31/1000 MB | 1000 | 1580 | 462 | Bearings, units and housings |
NNUD 6056 ECMAS/P53 | 280 | 420 | - | Bearings, units and housings |
NU 1880 MP | 400 | 500 | 46 | Bearings, units and housings |
NU 311 ECM | 55 | 120 | 29 | Bearings, units and housings |
OH 2348 H | 220 | 240 | 199 | Bearings, units and housings |
OKCX 210 | 210 | - | ||
SAKAC 25 M | 25 | - | 31 | Bearings, units and housings |
Hot number:
23040-2CS5K/VT143
16657
1982/1924 A
30x55x10 HMSA10 RG
31326T164 X/DB
50x65x10 HMSA10 V
6411 N
7020 ACD/HCP4AH1
BT4-8003 G/HA1VA902
TQO design
NJ 2224 ECP
NNU 4880 K/W33
OH 30/710 HE
QJ 1260 N2MA
W 627/4 R-2Z
Previous:SAFS 22522 x 3.13/16 TLC Bearings, units and housings ---- Next:SAFS 22522 x 3.7/8 T Bearings, units and housings
Return to SKF bearing