da | 101.6 | mm | |
Da | 200 | mm | |
Ca | 62.89 | mm | |
A1 | 120.65 | mm | |
A2 | 165.1 | mm | |
S | 4.763 | mm | |
ba | 50.006 | mm | |
H | 244.475 | mm | |
H1 | 125.425 | mm | |
H2 | 52.388 | mm | |
L | 419.1 | mm | |
Threaded holes | |||
R1 | 67.866 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 45.244 | mm |
End plug (suffix Y) |
EPR 13
|
Bearing limiting speed | 4000 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 17.3 | kN |
Mass pillow block | 54 | kg |
Cap bolt |
4 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 3/8-16 UNC
|
|||
Initial grease fill | 232.47 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
14x24x7 HMS5 V | 14 | 24 | 7 | Seals |
---|---|---|---|---|
415 VE R | 405 | - | - | Seals |
6000/HR22Q2 | 10 | 26 | 8 | Bearings, units and housings |
62x75x10 CRS1 R | 62 | 75 | 10 | Seals |
92536 | 234.95 | 285.75 | 15.88 | Seals |
GEH 120 ES-2RS | 120 | 210 | 70 | Bearings, units and housings |
NCF 28/530 V | 530 | 650 | 72 | Bearings, units and housings |
NJ 2326 ECPA | 130 | 280 | 93 | Bearings, units and housings |
NUP 211 ECJ | 55 | 100 | 21 | Bearings, units and housings |
PCMF 353916 E | 35 | 39 | 16 | Bearings, units and housings |
SAFS 23044 KATLC x 8 | 203.2 | - | - | Bearings, units and housings |
SYNT 35 LTS | 35 | - | - | Bearings, units and housings |
Hot number:
BD-241/630 ECAK30/W33-AOH 241/630 G
305428 D
30x52x10 HMS5 V
3309 DNRCBM
331197 A
38x58x8 HMS5 V
420x460x20 HDS2 R
54925
6012-Z
62572
IR 85x100x35
K 26x30x17
OKBS 120
W 634 R-2Z
YAR 204-012-2RFGR/HV
Previous:SSAFS 22522 x 3.7/8 TLC Bearings, units and housings ---- Next:SSAFS 22522 x 4 T Bearings, units and housings
Return to SKF bearing