da | 174.625 | mm | |
Da | 339.999 | mm | |
Ca | 101.803 | mm | |
A1 | 190.5 | mm | |
A2 | 339.725 | mm | |
S | 4.763 | mm | |
ba | 78.581 | mm | |
H | 401.637 | mm | |
H1 | 200.025 | mm | |
H2 | 79.375 | mm | |
J | min. | 549.275 | mm |
J | max. | 619.125 | mm |
J1 | 114.3 | mm | |
L | 711.2 | mm | |
N1 | 34.925 | mm | |
Threaded holes | |||
R1 | 120.65 | mm | |
R2 | 42.069 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 61.913 | mm |
Housing |
SAF 538
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-38-32
|
|||
Taconite seal | TER 154 | |||
|
End plug (suffix Y) |
EPR 21
|
Max. speed for Taconite seal | 440 | r/min |
P60° | 290 | kN | |
P90° | 173 | kN | |
P120° | 107 | kN | |
P150° | 94.3 | kN | |
P180° | 113 | kN | |
Pa | 52.5 | kN |
Mass pillow block | 170 | kg |
Cap bolt |
4 x 7/8-9 UNC
|
|||
Cap bolt recommended tightening torque | 528.8 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 1/2-13 UNC
|
|||
Appropriate attachment bolt size | G | 1.25 | in | |
Initial grease fill | 1672.65 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
1219 | 95 | 170 | 32 | Bearings, units and housings |
---|---|---|---|---|
1726207-2RS1 | 35 | 72 | 17 | Bearings, units and housings |
28x42x7 HMSA10 RG | 28 | 42 | 7 | Seals |
45110 | 114.3 | 152.43 | 12.7 | Seals |
45x68x7 HMSA10 RG | 45 | 68 | 7 | Seals |
95x115x12 HMSA10 V | 95 | 115 | 12 | Seals |
BC4-8053/HA4 | 580 | 780 | - | Bearings, units and housings |
KMT 15 | 28 | - | 75 | Bearings, units and housings |
KRE 16 PPA | - | 16 | 11 | Bearings, units and housings |
NU 2308 ECML | 40 | 90 | 33 | Bearings, units and housings |
P 85 R-40 WF | 40 | - | - | Bearings, units and housings |
PSMF 202615 A51 | 20 | 26 | 15 | Bearings, units and housings |
Hot number:
1317 K + H 317
331300
50x62x7 HMSA10 V
51168 M
53307 + U 307
5541
609/670 MA
9888
86260
BS2-2309-2RS/VT143
FYR 1 15/16-18
IR 12X16X12 IS1
HA 3040
LM 361649 A/610
W 61904 R
Previous:SAF 22538 x 6.7/8 Bearings, units and housings ---- Next:SAF 22538 x 6.7/8 TLC Bearings, units and housings
Return to SKF bearing