da | 82.55 | mm | |
Da | 190 | mm | |
Ca | 73.787 | mm | |
A1 | 111.125 | mm | |
A2 | 174.625 | mm | |
S | 4.763 | mm | |
ba | 52.388 | mm | |
H | 230.981 | mm | |
H1 | 120.65 | mm | |
H2 | 50.8 | mm | |
J | min. | 304.8 | mm |
J | max. | 342.9 | mm |
J1 | 57.15 | mm | |
L | 393.7 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 73.025 | mm | |
R2 | 28.575 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 47.625 | mm |
Housing |
SAF 618
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-21-18
|
|||
Labyrinth ring |
2 x LOR 189
|
|||
PosiTrac Plus contact element |
2 x B10724-188
|
|||
|
End plug (suffix Y) |
EPR 11
|
Max. speed for PosiTrac Plus seal | 1800 | r/min |
P60° | 128 | kN | |
P90° | 77 | kN | |
P120° | 48.9 | kN | |
P150° | 44.5 | kN | |
P180° | 54.3 | kN | |
Pa | 17.3 | kN |
Mass pillow block | 44 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 515.2 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 232.47 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
110x140x12 HMSA10 RG | 110 | 140 | 12 | Seals |
---|---|---|---|---|
331925 | 609.6 | 813.562 | - | Bearings, units and housings |
72510 | 184.15 | 222.25 | 15.88 | Seals |
85535 | - | - | 25.4 | Seals |
86974 | - | - | 50.8 | Seals |
BS2-2208-2RSK/VT143 | 40 | 80 | 28 | Bearings, units and housings |
FNL 515 B | 65 | - | - | Bearings, units and housings |
HK 2524.2RS | 25 | 32 | 24 | Bearings, units and housings |
KR 35 B | - | 35 | 18 | Bearings, units and housings |
NRT 100 B | 100 | 185 | 38 | Bearings, units and housings |
OKBS 89 | 89 | - | - | |
SAFS 22530 x 5.1/8 TLC | 130.175 | - | - | Bearings, units and housings |
Hot number:
13858
2218 KM
285x325x16 HDS1 R
29925
30x50x8 HMS5 V
594202
7515
70/750 AMB
7008 ACE/HCP4AL
71956 ACD/P4A
BT4B 332827 AG/HA1
RNU 207 ECJ
W 61818-2Z
WS 81232
YAT 211-200
Previous:SAF 22618 x 3.1/4 T Bearings, units and housings ---- Next:SAF 22618 x 3.1/8 Bearings, units and housings
Return to SKF bearing