

| da | 101.6 | mm | |
| Da | 240 | mm | |
| Ca | 89.789 | mm | |
| A1 | 133.35 | mm | |
| A2 | 206.375 | mm | |
| S | 4.763 | mm | |
| ba | 63.5 | mm | |
| H | 287.337 | mm | |
| H1 | 152.4 | mm | |
| H2 | 60.325 | mm | |
| J | min. | 371.475 | mm |
| J | max. | 406.4 | mm |
| J1 | 82.55 | mm | |
| L | 466.725 | mm | |
| N1 | 25.4 | mm | |
| Threaded holes | |||
| R1 | 79.375 | mm | |
| R2 | 36.513 | mm | |
| RG | 1/2 NPT | ||
| PG | 1/4 NPT | ||
| Oil level | |||
| h | 61.119 | mm | |
| End plug (suffix Y) |
EPR 13
|
|||
| Bearing limiting speed | 2800 | r/min |

| P60° | 189 | kN | |
| P90° | 113 | kN | |
| P120° | 73.8 | kN | |
| P150° | 68.1 | kN | |
| P180° | 84.5 | kN | |
| Pa | 26.7 | kN |
| Mass pillow block | 69.3 | kg |
| Cap bolt |
2 x 1-8 UNC
|
|||
| Cap bolt recommended tightening torque | 1220 | N·m | ||
| Cap bolt, SAE grade | 8 | |||
| Appropriate attachment bolt size | G | 0.875 | in | |
| Initial grease fill | 382.73 | g | ||
| Model No. | Inner Diameter | Outer Diameter | Width | Type |
| 14 VA R | 12.5 | - | - | Seals |
|---|---|---|---|---|
| 405002 | 450 | - | - | Seals |
| 65 VA V | 58 | - | - | Seals |
| 97545 | 247.65 | 285.75 | 15.88 | Seals |
| IR 15x18x16 | 15 | 18 | 16 | Bearings, units and housings |
| K 43x48x27 | 43 | 48 | 27 | Bearings, units and housings |
| NJ 2220 ECP | 100 | 180 | 46 | Bearings, units and housings |
| PSM 303820 A51 | 30 | 38 | 20 | Bearings, units and housings |
| RNAO 12x22x12 TN | 12 | 22 | 12 | Bearings, units and housings |
| RSTO 35 | 42 | 72 | 19.8 | Bearings, units and housings |
| SAF 22530 | 131.7625 | - | - | Bearings, units and housings |
| SAW 23544 x 8 | 203.2 | - | - | Bearings, units and housings |
Hot number:
1300 VRME R
23040 CCK/W33
18039
319320
32210
7204 BEGBP
85367
BT2-8019
ECY 210
GB 4940
PSM 657560 A51
PSMF 202615 A51
SAFS 22220 T
SAW 23544 x 7.13/16 T
SYR 4-3
Previous:SAF 22622 x 3.7/8 TLC Bearings, units and housings ---- Next:SAF 22622 x 4 T Bearings, units and housings
Return to SKF bearing