da | 103.188 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 228.6 | mm | |
ba | 46.831 | mm | |
H | 217.488 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
L | 387.35 | mm | |
N1 | 25.4 | mm | |
Threaded holes | |||
R1 | 58.737 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 39.688 | mm |
Housing |
SAF 024 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-24
|
|||
Taconite seal | TER 112 | |||
|
End plug (suffix Y) |
EPR 14
|
Max. speed for Taconite seal | 725 | r/min |
P60° | 136 | kN | |
P90° | 81.4 | kN | |
P120° | 50.7 | kN | |
P150° | 46.3 | kN | |
P180° | 55.6 | kN | |
Pa | 16.7 | kN |
Mass pillow block | 28.6 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
21310 EK | 50 | 110 | 27 | Bearings, units and housings |
---|---|---|---|---|
430x490x25 HDS1 R | 430 | 490 | 25 | Seals |
524209 | 330.2 | - | - | Seals |
60028 | 152.4 | 190.5 | 12.7 | Seals |
7084 BGM | 420 | 620 | 90 | Bearings, units and housings |
HJ 410 | 50 | 78.8 | 14.5 | Bearings, units and housings |
HM 44 T | 32 | - | 220 | Bearings, units and housings |
NJG 2311 VH | 55 | 120 | 43 | Bearings, units and housings |
RN-1.5x5.8 BF/G2 | - | - | 1.5 | Bearings, units and housings |
SAFS 22230 | 150 | - | - | Bearings, units and housings |
SY 45 TR | 45 | - | - | Bearings, units and housings |
YAR 208-2RF | 40 | 80 | 49.2 | Bearings, units and housings |
Hot number:
17919
312 NR
7212 BECBPH
8485
FBSA 204/DB
K 42x50x20
NKXR 50 Z
NU 2214 ECP
NUP 220 ECP
OKBS 54
P 1.1/4 TF
SAFS 23038 KAT x 7
SIA 60 ES-2RS
SSAFS 23026 KAT x 4.1/2
SYR 1 15/16 N
Previous:SAF 23024 KAT x 4.1/4 Bearings, units and housings ---- Next:SAFS 22240 Bearings, units and housings
Return to SKF bearing