da | 107.95 | mm | |
Da | 180 | mm | |
Ca | 55.804 | mm | |
A1 | 111.125 | mm | |
A2 | 155.575 | mm | |
ba | 46.831 | mm | |
H | 217.488 | mm | |
H1 | 114.3 | mm | |
H2 | 44.45 | mm | |
J | min. | 295.275 | mm |
J | max. | 333.375 | mm |
L | 387.35 | mm | |
N1 | 25.4 | mm | |
Threaded holes | |||
R1 | 58.737 | mm | |
R2 | 30.163 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 39.688 | mm |
Housing |
SAF 024 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-24
|
|||
Labyrinth ring |
2 x LOR 114
|
|||
|
End plug (suffix Y) |
EPR 14
|
Bearing limiting speed | 4000 | r/min |
P60° | 136 | kN | |
P90° | 81.4 | kN | |
P120° | 50.7 | kN | |
P150° | 46.3 | kN | |
P180° | 55.6 | kN | |
Pa | 16.7 | kN |
Mass pillow block | 28.6 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.875 | in | |
Initial grease fill | 181.44 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
24136-2CS5/VT143 | 180 | 300 | 118 | Bearings, units and housings |
---|---|---|---|---|
7213 BECBJ | 65 | 120 | 23 | Bearings, units and housings |
FYWK 35 YTA | 35 | - | - | Bearings, units and housings |
GEZM 308 ESX-2LS | 88.9 | 139.7 | 66.675 | Bearings, units and housings |
IR 30x35x13 | 30 | 35 | 13 | Bearings, units and housings |
KRV 22 B | - | 22 | 12 | Bearings, units and housings |
OKCX 700 | 700 | - | ||
S7014 CB/P4A | 70 | 110 | 20 | Bearings, units and housings |
SHT 19 | 19 | - | - | Coupling systems |
TU 1.15/16 TF | 49.213 | - | - | Bearings, units and housings |
W 638/8 R-2Z | 8 | 16 | 6 | Bearings, units and housings |
Z 206 | 30 | - | 6 | Seals |
Hot number:
10x24x7 HMS5 V
19407
22319 EK
BD-23248 CCK/W33-AOH 2348
7010 ACE/P4A
7013 CE/P4AL
71817 CD/HCP4
71913 CD/P4AL
BT4B 334023 E1/C675
FYK 25 TF
NNCL 4972 CV
NNU 4152 M/W33
SAF 23048 KAT x 8.7/16
T7FC 055T73/DTC10
TU 1.1/2 TF
Previous:SAF 23024 KA x 4.1/16 Bearings, units and housings ---- Next:SAF 23024 KA x 4.1/8 Bearings, units and housings
Return to SKF bearing