da | 112.713 | mm | |
Da | 200 | mm | |
Ca | 62.789 | mm | |
A1 | 120.65 | mm | |
A2 | 165.1 | mm | |
ba | 51.594 | mm | |
H | 239.713 | mm | |
H1 | 125.425 | mm | |
H2 | 50.8 | mm | |
J | min. | 320.675 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 67.945 | mm | |
R2 | 31.75 | mm | |
RG | 3/8 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 42.862 | mm |
Housing |
SAF 026 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 38151-26
|
|||
Labyrinth ring |
2 x LOR 117
|
|||
|
End plug (suffix Y) |
EPR 15
|
Bearing limiting speed | 3600 | r/min |
P60° | 149 | kN | |
P90° | 89 | kN | |
P120° | 55.6 | kN | |
P150° | 50.7 | kN | |
P180° | 60.9 | kN | |
Pa | 20.2 | kN |
Mass pillow block | 32.2 | kg |
Cap bolt |
2 x 3/4-10 UNC
|
|||
Cap bolt recommended tightening torque | 359.3 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 232.47 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
16006/HR11QN | 30 | 55 | 9 | Bearings, units and housings |
---|---|---|---|---|
50138 | 127 | 161.93 | 12.7 | Seals |
628/4-2Z | 4 | 9 | 3.5 | Bearings, units and housings |
7311 BECBY | 55 | 120 | 29 | Bearings, units and housings |
8060 | 20.6502 | 34.93 | 9.53 | Seals |
C 2234 K | 170 | 310 | 86 | Bearings, units and housings |
GE 40 ES-2LS | 40 | 62 | 28 | Bearings, units and housings |
HK 4518 RS | 45 | 52 | 18 | Bearings, units and housings |
OKC 600 | 600 | - | ||
SAF 22616 x 2.5/8 T | 66.675 | - | - | Bearings, units and housings |
SNW 26x4.5/16 | 109.5375 | 171.577 | 95.3008 | Bearings, units and housings |
SSAFS 22544 x 7.13/16 T | 198.4375 | - | - | Bearings, units and housings |
Hot number:
319286
51338 M
61948
68450/68712
7017 CB/HCP4AL
85844
BCZ-0087
C 2234 K
NNU 4164 K30F
OKBS 69
RNA 4906
S71922 ACB/P4A
SNW 111x1.15/16
SSAFS 23056 KATLC x 10.1/2
YEL 206-102-2F
Previous:SAF 23026 KA x 4.5/16 Bearings, units and housings ---- Next:SAF 23026 KAT x 4.1/2 Bearings, units and housings
Return to SKF bearing