da | 122.237 | mm | |
Da | 210 | mm | |
Ca | 72.619 | mm | |
A1 | 120.65 | mm | |
A2 | 255.588 | mm | |
ba | 53.975 | mm | |
H | 258.762 | mm | |
H1 | 133.35 | mm | |
H2 | 53.975 | mm | |
J | min. | 336.55 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 79.375 | mm | |
R2 | 30.163 | mm | |
RG | 1/2 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 46.038 | mm |
Housing |
SAF 028 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 36053-50
|
|||
Taconite seal | TER 120 | |||
|
End plug (suffix Y) |
EPR 27
|
Max. speed for Taconite seal | 625 | r/min |
P60° | 185 | kN | |
P90° | 111 | kN | |
P120° | 72.5 | kN | |
P150° | 66.7 | kN | |
P180° | 81.4 | kN | |
Pa | 22.2 | kN |
Mass pillow block | 62.6 | kg |
Cap bolt |
2 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 1220 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 379.89 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
160x190x15 HMSA10 RG | 160 | 190 | 15 | Seals |
---|---|---|---|---|
30212T53/DB | 60 | 110 | - | Bearings, units and housings |
40x60x8 CRW1 R | 40 | 60 | 8 | Seals |
511/710 F | 710 | 850 | 112 | Bearings, units and housings |
719/600 ACM | 600 | 800 | 90 | Bearings, units and housings |
71918 CE/P4AL | 90 | 125 | 18 | Bearings, units and housings |
71921 ACD/HCP4AL | 105 | 145 | 20 | Bearings, units and housings |
AOH 24196 | 460 | 480 | 340 | Bearings, units and housings |
K 10x13x16 TN | 10 | 13 | 16 | Bearings, units and housings |
K 16x22x20 | 16 | 22 | 20 | Bearings, units and housings |
NKX 70 Z | 70 | 85 | 40 | Bearings, units and housings |
OKC 330 | 330 | - |
Hot number:
1301 ETN9
16100/HR11TN
29907
6028-2RS1
7304 BEP
7308 ACCBM
85x130x12 HMS5 V
9409
BT2B 328020
BT2B 331836
FSNL 316 TURU
NJ 28/1000 ECMA/HB1
PSM 7585100 A51
SSAFS 22536 x 6.3/8 TLC
YAR 209-111-2FW/VA228
Previous:SAF 23028 KA x 5 Bearings, units and housings ---- Next:SAF 23028 KAT x 4.15/16 Bearings, units and housings
Return to SKF bearing