da | 125.412 | mm | |
Da | 210 | mm | |
Ca | 72.619 | mm | |
A1 | 120.65 | mm | |
A2 | 255.588 | mm | |
ba | 53.975 | mm | |
H | 258.762 | mm | |
H1 | 133.35 | mm | |
H2 | 53.975 | mm | |
J | min. | 336.55 | mm |
J | max. | 368.3 | mm |
J1 | 69.85 | mm | |
L | 419.1 | mm | |
N1 | 22.225 | mm | |
Threaded holes | |||
R1 | 79.375 | mm | |
R2 | 30.163 | mm | |
RG | 1/2 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 46.038 | mm |
Housing |
SAF 028 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 36053-50
|
|||
Taconite seal | TER 121 | |||
|
End plug (suffix Y) |
EPR 27
|
Max. speed for Taconite seal | 625 | r/min |
P60° | 185 | kN | |
P90° | 111 | kN | |
P120° | 72.5 | kN | |
P150° | 66.7 | kN | |
P180° | 81.4 | kN | |
Pa | 22.2 | kN |
Mass pillow block | 62.6 | kg |
Cap bolt |
2 x 1-8 UNC
|
|||
Cap bolt recommended tightening torque | 1220 | N·m | ||
Cap bolt, SAE grade | 8 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 379.89 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
21320 E | 100 | 215 | 47 | Bearings, units and housings |
---|---|---|---|---|
22353 | 57.15 | 76.2 | 9.53 | Seals |
2310 K + H 2310 | 45 | 110 | 40 | Bearings, units and housings |
305704 C-2RS1 | 20 | 52 | 20.6 | Bearings, units and housings |
36x50x7 HMSA10 RG | 36 | 50 | 7 | Seals |
42x62x10 HMSA10 V | 45 | 62 | 10 | Seals |
51140 M | 200 | 250 | 37 | Bearings, units and housings |
IR 60x68x35 | 60 | 68 | 35 | Bearings, units and housings |
PRM 151715 | 15 | 17 | 15 | Bearings, units and housings |
RLS 5-2Z | 15.875 | 39.688 | 11.112 | Bearings, units and housings |
SAF 22534 x 6 T | 152.4 | - | - | Bearings, units and housings |
SC 35 ES | 35 | - | 25 | Bearings, units and housings |
Hot number:
1600018
470x530x25 HDS1 D
6313 NR
71910 ACD/P4A
7316 BECBP
FYJ 45 TF
IR 95x105x36
LM 806649/610
NAO 30x45x17
OKC 680
OKCX 190
PSM 121612 A51
S7024 CB/P4A
S71918 ACE/HCP4A
SNL 3234
Previous:SAF 23028 KAT x 4.15/16 Bearings, units and housings ---- Next:SAF 23028 KAT x 5 Bearings, units and housings
Return to SKF bearing