da | 201.613 | mm | |
Da | 339.999 | mm | |
Ca | 101.803 | mm | |
A1 | 190.5 | mm | |
A2 | 273.05 | mm | |
ba | 80.169 | mm | |
H | 401.637 | mm | |
H1 | 200.025 | mm | |
H2 | 79.375 | mm | |
J | min. | 549.275 | mm |
J | max. | 619.125 | mm |
J1 | 114.3 | mm | |
L | 711.2 | mm | |
N1 | 34.925 | mm | |
Threaded holes | |||
R1 | 120.65 | mm | |
R2 | 42.069 | mm | |
RG | 1 NPT | ||
PG | 1/4 NPT | ||
Oil level | |||
h | 57.15 | mm |
Housing |
SAF 044 KA
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
2 x 36053-140
|
|||
Labyrinth ring |
2 x LOR 167
|
|||
|
End plug (suffix Y) |
EPR 23
|
Bearing limiting speed | 2000 | r/min |
P60° | 290 | kN | |
P90° | 173 | kN | |
P120° | 107 | kN | |
P150° | 94.3 | kN | |
P180° | 113 | kN | |
Pa | 59.6 | kN |
Mass pillow block | 153 | kg |
Cap bolt |
4 x 7/8-9 UNC
|
|||
Cap bolt recommended tightening torque | 528.8 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Eye bolt |
2 x 1/2-13 UNC
|
|||
Appropriate attachment bolt size | G | 1.25 | in | |
Initial grease fill | 1672.65 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
18785 | 47.625 | 76.12 | 7.95 | Seals |
---|---|---|---|---|
40x65x10 HMS5 V | 40 | 65 | 10 | Seals |
45x75x8 CRW1 R | 45 | 75 | 8 | Seals |
7218 BEP | 90 | 160 | 30 | Bearings, units and housings |
7636 | 19.05 | 44.5 | 6.35 | Seals |
KMK 0 | 9 | - | 10 | Bearings, units and housings |
KRV 22 B | - | 22 | 12 | Bearings, units and housings |
NUTR 1542 X | 15 | 42 | 18 | Bearings, units and housings |
S71914 CE/P4A | 70 | 100 | 16 | Bearings, units and housings |
SAF 22628 TLC | 125.4125 | - | - | Bearings, units and housings |
SNW 117x3 | 76.2 | 85 | 83.8708 | Bearings, units and housings |
SYE 1 7/16 | 36.5125 | - | - | Bearings, units and housings |
Hot number:
TDI design
6211-2ZNR
63008-2RS1
7017 CB/HCP4A
71906 ACE/P4A
85x105x12 HMS5 V
FYK 20 WD
H 309
PSM 222720 A51
RN-3.5x17.8 BF/G2
SAL 45 ESX-2LS
SNW 128x4.13/16
SC 80 ES
SHT 95
SIL 10 C
Previous:SAF 23044 KA x 7.13/16 Bearings, units and housings ---- Next:SAF 23044 KA x 7.7/8 Bearings, units and housings
Return to SKF bearing