da | 80 | mm | |
db | 92.075 | mm | |
dc | 76.2 | mm | |
Da | 140 | mm | |
Ca | 42.799 | mm | |
A1 | 88.9 | mm | |
A2 | 208.756 | mm | |
S | 4.763 | mm | |
ba | 34.131 | mm | |
H | 174.625 | mm | |
H1 | 88.9 | mm | |
H2 | 31.75 | mm | |
J | min. | 244.475 | mm |
J | max. | 279.4 | mm |
J1 | 53.975 | mm | |
L | 330.2 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 53.181 | mm | |
R2 | 21.431 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 31.75 | mm |
End plug (suffix Y) |
EPR 9
|
Max. speed for Taconite seal | 850 | r/min |
P60° | 60.5 | kN | |
P90° | 36 | kN | |
P120° | 21.8 | kN | |
P150° | 19.6 | kN | |
P180° | 23.1 | kN | |
Pa | 14.7 | kN |
Mass pillow block | 20 | kg |
Cap bolt |
2 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 87.885 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
25x42x7 HMSA10 V | 25 | 42 | 7 | Seals |
---|---|---|---|---|
2600330 | 660.4 | 701.68 | 19.05 | Seals |
35x55x10 HMS5 RG | 35 | 55 | 10 | Seals |
4909 | 12.7 | 17.48 | 4.32 | Seals |
806715 | 374.65 | 424.053 | - | Seals |
AH 2308 | 35 | 40 | 40 | Bearings, units and housings |
H 315 E | 65 | 75 | 55 | Bearings, units and housings |
NN 3076 K/SPW33 | 380 | 560 | 135 | Bearings, units and housings |
PFD 35 RM | 35 | - | - | Bearings, units and housings |
SAFS 22518-11 x 3.1/16 T | 77.7875 | - | - | Bearings, units and housings |
SE 208-307 | 35 | - | - | Bearings, units and housings |
SY 1.15/16 TF/VA201 | 49.213 | - | - | Bearings, units and housings |
Hot number:
110x140x12 CRW1 R
13869
30244
360x392x20 HDS1 R
38x80x8 HMS5 V
45 VS V
471526
510/850 M
51296 F
63.6x82.5x15.0 TP
GEH 80 TXG3A-2LS
HE 308 E
PWM 303640
SAF 22534 x 5.13/16
Z 301
Previous:SAFS 22216-11 Bearings, units and housings ---- Next:SAFS 22216-11 TLC Bearings, units and housings
Return to SKF bearing