da | 80.963 | mm | |
Da | 160 | mm | |
Ca | 49.809 | mm | |
A1 | 98.425 | mm | |
A2 | 206.375 | mm | |
S | 4.763 | mm | |
ba | 40.481 | mm | |
H | 196.85 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
J1 | 53.975 | mm | |
L | 349.25 | mm | |
N1 | 19.05 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
Housing |
FSAFS 518
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-18-15
|
|||
Taconite seal | TER 188 | |||
|
End plug (suffix Y) |
EPR 11
|
Max. speed for Taconite seal | 950 | r/min |
P60° | 101 | kN | |
P90° | 60.9 | kN | |
P120° | 38.3 | kN | |
P150° | 34.7 | kN | |
P180° | 42.3 | kN | |
Pa | 10.9 | kN |
Mass pillow block | 30.4 | kg |
Cap bolt |
4 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.625 | in | |
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
2305 M | 25 | 62 | 24 | Bearings, units and housings |
---|---|---|---|---|
62308-2RS1 | 40 | 90 | 33 | Bearings, units and housings |
7032 ACD/P4A | 160 | 240 | 38 | Bearings, units and housings |
7210 BE-2RZP | 50 | 90 | 20 | Bearings, units and housings |
90x125x13 CRSH1 R | 90 | 125 | 13 | Seals |
BT4B 332590/HA1 | 431.8 | 647.7 | - | Bearings, units and housings |
C 4030 V | 150 | 225 | 75 | Bearings, units and housings |
D/W RW166-2Z | 4.762 | 9.525 | 3.967 | Bearings, units and housings |
G 17x23x3 | 17 | 23 | 3 | Seals |
MB 3 | 17 | 32 | - | Bearings, units and housings |
PRMF 606530 | 60 | 65 | 30 | Bearings, units and housings |
SYFWK 507 L | - | - | - | Bearings, units and housings |
Hot number:
17390
BD-239/800 CAK/W33-OH 39/800 H
31227
6004 NR
7015 ACE/P4A
89176 M
99094
99167
FYC 510
FYNT 70 L
N 322 ECM
PBM 354570 M1G1
NK 37/30
NU 2348 ECMA
W 619/3 R
Previous:SAFS 22518-11 Bearings, units and housings ---- Next:SAFS 22518-11 TLC Bearings, units and housings
Return to SKF bearing