da | 79.375 | mm | |
Da | 160 | mm | |
Ca | 49.809 | mm | |
A1 | 98.425 | mm | |
A2 | 206.375 | mm | |
S | 4.763 | mm | |
ba | 40.481 | mm | |
H | 196.85 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
L | 349.25 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
Housing |
SSAFS 518
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-18-15
|
|||
Taconite seal | TER 189 | |||
|
End plug (suffix Y) |
EPR 11
|
Max. speed for Taconite seal | 950 | r/min |
P60° | 121 | kN | |
P90° | 72.5 | kN | |
P120° | 45.4 | kN | |
P150° | 40.5 | kN | |
P180° | 49.8 | kN | |
Pa | 10.9 | kN |
Mass pillow block | 31.3 | kg |
Cap bolt |
4 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
130x170x12 HMSA10 V | 130 | 170 | 12 | Seals |
---|---|---|---|---|
18724 | 47.5996 | 63.4 | 8.91 | Seals |
BD-23184 CKJ/W33-OH 3184 H | 400 | 700 | 224 | Bearings, units and housings |
71919 CD/HCP4AL | 95 | 130 | 18 | Bearings, units and housings |
NKIB 5909 | 45 | 68 | 34 | Bearings, units and housings |
OKBS 131 | 131 | - | - | |
S71928 CD/P4A | 140 | 190 | 24 | Bearings, units and housings |
SAF 22610 | 42.8625 | - | - | Bearings, units and housings |
SAF 22613 x 2.1/4 | 57.15 | - | - | Bearings, units and housings |
W 619/5 R-2Z | 5 | 13 | 4 | Bearings, units and housings |
W 61903 R | 17 | 30 | 7 | Bearings, units and housings |
W 6303-2RS1 | 17 | 47 | 14 | Bearings, units and housings |
Hot number:
14x25x5 HMS5 V
23022 CCK/W33
BD-24038 CCK30/W33-AH 24038
25x37x6 HMSA10 V
TDI design
6207-ZNR
87777
K 15x18x17 TN
KM 27
OH 30/900 HE
OKF 330
SAF 1316 TLC
SAF 1510 x 1.3/4 T
SNL 3160 TURA
SNW 3140x7.3/16
Previous:SSAFS 22518 x 3.1/8 Bearings, units and housings ---- Next:SSAFS 22520 Bearings, units and housings
Return to SKF bearing