da | 77.787 | mm | |
Da | 160 | mm | |
Ca | 49.809 | mm | |
A1 | 98.425 | mm | |
A2 | 149.225 | mm | |
S | 4.763 | mm | |
ba | 40.481 | mm | |
H | 196.85 | mm | |
H1 | 101.6 | mm | |
H2 | 41.275 | mm | |
J | min. | 263.525 | mm |
J | max. | 295.275 | mm |
L | 349.25 | mm | |
N1 | 23.813 | mm | |
Threaded holes | |||
R1 | 60.325 | mm | |
R2 | 27.781 | mm | |
RG | 3/8 NPT | ||
PG | 1/8 NPT | ||
Oil level | |||
h | 38.1 | mm |
Housing |
SAFS 518
|
|||
Bearing | ||||
Adapter sleeve assembly | ||||
Stabilizing ring |
SR-18-15
|
|||
Labyrinth ring |
2 x LOR 186
|
|||
|
End plug (suffix Y) |
EPR 11
|
Bearing limiting speed | 5300 | r/min |
P60° | 121 | kN | |
P90° | 72.5 | kN | |
P120° | 45.4 | kN | |
P150° | 40.5 | kN | |
P180° | 49.8 | kN | |
Pa | 10.9 | kN |
Mass pillow block | 30.8 | kg |
Cap bolt |
4 x 5/8-11 UNC
|
|||
Cap bolt recommended tightening torque | 203.4 | N·m | ||
Cap bolt, SAE grade | 5 | |||
Appropriate attachment bolt size | G | 0.75 | in | |
Initial grease fill | 141.75 | g |
Model No. | Inner Diameter | Outer Diameter | Width | Type |
16x35x7 HMS5 V | 16 | 35 | 7 | Seals |
---|---|---|---|---|
25x47x10 HMS5 RG | 25 | 47 | 10 | Seals |
50x80x10 HMSA10 RG | 50 | 80 | 10 | Seals |
6207-2RZTN9/HC5C3WT | 35 | 72 | 17 | Bearings, units and housings |
71905 CE/HCP4A | 25 | 42 | 9 | Bearings, units and housings |
7438 | 19.05 | 31.75 | 6.35 | Seals |
FSNL 526 TURU | 115 | - | - | Bearings, units and housings |
FY 1.3/4 TF/VA228 | 44.45 | - | 54.2 | Bearings, units and housings |
IR 65x73x25 | 65 | 73 | 25 | Bearings, units and housings |
PBM 051006 M1 | 5 | 10 | 6 | Bearings, units and housings |
SAFS 23040 KATLC x 7.1/4 | 184.15 | - | - | Bearings, units and housings |
W 6004-2RS1 | 20 | 42 | 12 | Bearings, units and housings |
Hot number:
1400 VA R
22626
28751
3206 A-2RS1
53204 + U 204
6226 M
6303-2ZNR
BT4-8069 G/HA1VA901
D/W R6 R-2RZ
KD2-153
KRV 47 PPXA
PBMF 9511550 M1G1
SAF 22232
SAFS 23024 KAT x 4
SNW 122x3.3/4
Previous:SAFS 22518 TLC Bearings, units and housings ---- Next:SAFS 22518 x 3.1/16 T Bearings, units and housings
Return to SKF bearing